Have a pair of Fleetmaster lower units off 2003 250xs’s with 449 hours. They came off 30” motors. I purchased the motors for the power heads and do not
Last Post By: mango Today, 05:49 PMI laugh every time I see this.
This World is in their past now ... peace be you with ...
I have 97 225 Carbed OB, 20" leg, Bobs Cone, has Merc Mirage Plus 25" I believe, its on a 21 Challenger (knock off), over a foot of setback,
Last Post By: 21challanger Today, 05:04 PM.
Pantera building a plug from an original 24 footer
Trying to find out the exact material used on the slide section on CMC jackplate . Its a grayish plastic materail around 3/32 thick . I cant recall the
Last Post By: David - WI Today, 02:30 PMLooking for 12x22-23 13 spline cleavers
Last Post By: Roflhat Today, 12:03 PMBarley used and like new 14.5x32 Real Mercury PRO ET flow hub. I had Mike from F&J do some light lab work, little more rake and cleaned her up, was
Last Post By: 25two.stroke Today, 11:35 AMHi,
Bought an Exocet 23 (piranha hull with phantom deck) and I put a 300 R, 1.75 TM, on it (not an SM, no hydraulic jackplate on it).
What would you pick and why? I have not seen much on the yamahas (I kno this site is mostly Merc based tho)
Last Post By: mistah_max Today, 10:23 AMI have a 1985 Mercury Black Max 150 V6. I started it up this spring to find out that the starboard side is not firing. I unhooked the two yellow wires
Last Post By: skialot2 Today, 10:22 AMhttps://youtu.be/pNfU_rRc28w?si=bBGtyAVBNIkayaLy
My bro got a decent video of us runnin this weekend, got 6th place and 2nd big fish with a 5.58
Those f n Google ad pop ups are back again............
Last Post By: rock Today, 08:22 AM
Xr6 lower unit
Thread Starter: bbezokHave a 1993 XR6, 4-1/4" lower unit, clean freshwater unit, 20" RH, 1:78 gears, new seals. Part #1674-814247-C.
Last Post By: Greg G Today, 05:51 PM$600 or best offer, prefer