Australian Bullet's

[Oz Dude]

That black one don't look like it'll go real fast. At least he can easily check if his props are ok

Bulldog - 17 years 17 years 17years

I'll be snappin some pics on Sunday at the 120 so I'll put a few up next week.

Oz

[17_Matra_Missile]

Hey guys, Need a Midsection for a 2.5l Merc/Mariner. With or without ram, Offshore or standard, Cheers

[Thewayweroll]

Just a heads up ,my new 1 year old Bullet Fibreglass fuel tank split and was full of Bog ,I bumped into another guy who said when his tank split Bullet QLD told him he must have put the wrong fuel in ???.The factory was closed when i went there, a tenant in an adjoining factory said ah another fuel tank eh.

1 Aluminium tank coming up .

[Oz Dude]

Bulldog - that's not a good sign.

Shake crap outa it till you get satisfaction!

Oz

[Thewayweroll]

In with anger out with love

[keanos bullet]

Just a heads up ,my new 1 year old Bullet Fibreglass fuel tank split and was full of Bog ,I bumped into another guy who said when his tank split Bullet QLD told him he must have put the wrong fuel in ???.The factory was closed when i went there, a tenant in an adjoining factory said ah another fuel tank eh.

1 Aluminium tank coming up .

Is bullet boats at the goldcoast closed down now have they?? Ive been trying to get hold of there phone number; but i do remember the last time i spoke to them they said that they where having big dramas with yellow pages not putting there adverts in for the past 3 years. So when you said that they were closed do you mean completly or just for the day.
My boat is all stripped down now and i am looking to hve some miner repairs done to the hull and have it coated and trimmed, and was going to get them to do it,

[Thewayweroll]

I dont know for sure ,they were just closed when i went there ,the guy i spoke to down the river said he had to make an appointment to see them and they were very unhelpful, then blamed him for putting the wrong fuel in ??so he said .

[Oz Dude]

I thought it was only a part time dealio for the guy running it??

Oz

[keanos bullet]

I thought it was only a part time dealio for the guy running it??

Oz

Oz" The last time i spoke to the gentleman was about a year ago and he said that he runs the show for the origanal owners and when i went in there to pick up a bow tip for the bullet there was quite a few boats in there that where either getting built or repaired (Some large boats to) Also While ive got you oz remember the last time we spoke i was chasing down a steering setup for my bullet and you gave me a phone number to ring well ive lost it and cant seem to track back on the older posts. it turns out that the person you put me onto was the wrong workshop Wuold you have his name and number at all please.

[Oz Dude]

I'll get it for you over the weekend. My mate who bought the steering off him is working on the Harbour ridge at night this week so he's asleep for the arvo.

Stay tuned.

Oz

[jarrahtin]

My 1750 Bullet is all but finished, ready for the long weekend i have a couple of pics.....

[Oz Dude]

Oz" The last time i spoke to the gentleman was about a year ago and he said that he runs the show for the origanal owners and when i went in there to pick up a bow tip for the bullet there was quite a few boats in there that where either getting built or repaired (Some large boats to) Also While ive got you oz remember the last time we spoke i was chasing down a steering setup for my bullet and you gave me a phone number to ring well ive lost it and cant seem to track back on the older posts. it turns out that the person you put me onto was the wrong workshop Wuold you have his name and number at all please.

Check your PM's

My 1750 Bullet is all but finished, ready for the long weekend i have a couple of pics.....

Jarrah - looks good mate

Prop is in the car. Will drop off later this week. You nearly got it yesterday afternoon cause I had to drive around the countryside thanks very much Bunnings

Oz

[50cal]

just a few build up pics 1650 bullet 2.4 efi bridgeport front half
on 2.4 200 block, still untested......

[keanos bullet]

I'll get it for you over the weekend. My mate who bought the steering off him is working on the Harbour ridge at night this week so he's asleep for the arvo.

Stay tuned.

Oz

Thank"s again Oz. I rang him up as soon as i got your pm. I told him that i am now going to have a brand new 175hp Mariner on the back now and will be spending most of my time in the upper reaches of the brisbane river (Lots of dog legs and corners) so i need quick steering. He new where i meant; and sets up all of the racers down on the gold coast with there bullets (teleflex seastar HH5774 pro helm 2.0cu-1000psi And a Hynautic k6 alloy steering cyl Square looking type). and has no dramas. I told him of the type you use on yours and he said that you have the best out of all steerings on your boat But he cannot get parts for them no more (all over now) The helms that you need for your setup are obsolete. I was going to get a Evinrude E-tec for my boat; Because mercurys are like bum"s everybodys got one. But when i found out how much the price is for a E-tec and what you get (dont know about not touching it for 3 years) I can see why now everyone uses mercs-mariners.You get more for your dollar and some of the things that come on these motors that are factory compared to evinrudes Not to mention the fuel injection is better. I oppted for a 175hp because of the weight and power is user freindly for- She who must be obeyed. $17500.00 drive in drive out for the mariner and almost $21.000 for the E-tec. Just a question also on my bullet hull- The floor inside of it looks like its been raised up,i am going down the workshop today to get some pics but i can tell you without showing a picture that the floor is level with the 2 top lh and rh drain bungs in the rear and go's threw to the front foot rests, is this Std on some models or has someone had it modified,and if so why .

[Oz Dude]

Just a question also on my bullet hull- The floor inside of it looks like its been raised up,i am going down the workshop today to get some pics but i can tell you without showing a picture that the floor is level with the 2 top lh and rh drain bungs in the rear and go's threw to the front foot rests, is this Std on some models or has someone had it modified,and if so why .

Hi Mate - no probs on helping out - a phone number and an address was the least I could do

The floor you describe sounds right. there should be a slight angled section on each side just before the side pockets but other than that, flat all the way through. There was an option on older Bullets where you could get a "Dropped Floor" which ran a few inches deeper and allowed the driver to sit lower but most were built the way yours is (as is mine and the other 3 1750's mates have).

Oz