NEW Mercury Racing 200R

[FBM]

I have one new Mercury Racing 200R 1.75 Camber Sportmaster available.


This is a DTS engine and will require all new DTS controls. Engines do not come with prop or controls. Installation is available. Shipping to your dealer is available.

Warranty and Rebate promotions DO NOT apply. Includes 3 years of standard warranty with the option to purchase 5 additional years.


Fastbass Marine is located in Grand Rivers, KY on Kentucky Lake and Lake Barkley. We are a Mercury Repower Center with a Premier CSI Awarded Service Department.

Due to Mercury rules, prices cannot be posted. PM, Call, or Email for details.

270-217-1794
[email protected]

[David]

How cool. Do you have details of performance on the 21 Allison’s?

[mjf]

Could you please post the performance on the 21 Allison. For some unknown reason, Mercury is not releasing performance reports on the 200R unlike the previous R motors 300, 450 & 500. Before I spend approx. 20K it would be nice to see what sort of performance to expect

[FBM]

Could you please post the performance on the 21 Allison. For some unknown reason, Mercury is not releasing performance reports on the 200R unlike the previous R motors 300, 450 & 500. Before I spend approx. 20K it would be nice to see what sort of performance to expect

Probably because I have not released all of that information to Mercury or Allison yet, getting close though...just finished up all of the testing.

On a XB21 ProSport SUB with the 200R test engine, we saw a top end of 93.7 mph with a CNC and 93.0 with a new prototype prop that we are working on with Mercury. A Promax prop ran 90 mph.


In a separate application we had a 225 Promax run 98.xx MPH, removed it and installed the 200R test engine and backed it up with a 98.xx mph pass. The 200R runs well, but its not nearly as snappy as the 225 Promax.

[mjf]

Good day
With reference to my message on 2-7-25. Have you or Mercury been able to provide a comprehensive test on the Mercury 200R similar to Mercury performance tests. I can't find one anywhere
Thanks

[FBM]

Good day
With reference to my message on 2-7-25. Have you or Mercury been able to provide a comprehensive test on the Mercury 200R similar to Mercury performance tests. I can't find one anywhere
Thanks

We did the testing for Allison and Mercury Racing on a 2025 XB-21 Prosport. I submitted all of the test data to Mercury Racing and Allison but it doesn’t seem like its going to get posted.

The engine we ran was an early test engine labeled V6R -Basically it was a modified production engine with mechanical controls so we could easily move it from boat to boat and test different platforms. Without going into specifics there, here is what I can say:

Test Boat: 2025 Allison XB-21 ProSport SUB
Engine: Mercury 200R w/ 1.75 Sportmaster

Setup for top end: Mercury CNC 5 Blade 93.7 mph @ 5800 RPM
30P Prototype Merc Racing 4 Blade: 93.0 @ 6150
30P Promax: 90 mph @ 6150
28P Promax: 88 mph @ 6150
26P Bravo FS: 84 mph @ 6380

We also ran it on an undisclosed 20’ Bass Boat

225 Promax: 98.xx MPH
200R: 98.xx MPH

The biggest difference is the Promax was quicker to topend by about 15 seconds, but as tested the V6R weighed 485lbs plus 27lbs for the cowl - 512lbs total w/ sporty and fluids.

It is most definitely on the positive side of 200HP.

[aj06bolt12r]

Thank you for doing this work and posting this information. I appreciate it.

[FBM]

Thank you for doing this work and posting this information. I appreciate it.

You’re welcome!

[Brayo]

We did the testing for Allison and Mercury Racing on a 2025 XB-21 Prosport. I submitted all of the test data to Mercury Racing and Allison but it doesn’t seem like its going to get posted.

The engine we ran was an early test engine labeled V6R -Basically it was a modified production engine with mechanical controls so we could easily move it from boat to boat and test different platforms. Without going into specifics there, here is what I can say:

Test Boat: 2025 Allison XB-21 ProSport SUB
Engine: Mercury 200R w/ 1.75 Sportmaster

Setup for top end: Mercury CNC 5 Blade 93.7 mph @ 5800 RPM
30P Prototype Merc Racing 4 Blade: 93.0 @ 6150
30P Promax: 90 mph @ 6150
28P Promax: 88 mph @ 6150
26P Bravo FS: 84 mph @ 6380

We also ran it on an undisclosed 20’ Bass Boat

225 Promax: 98.xx MPH
200R: 98.xx MPH

The biggest difference is the Promax was quicker to topend by about 15 seconds, but as tested the V6R weighed 485lbs plus 27lbs for the cowl - 512lbs total w/ sporty and fluids.

It is most definitely on the positive side of 200HP.

Thank you for sharing, well detailed

[Greg G]

The biggest difference is the Promax was quicker to top end by about 15 seconds, but as tested the V6R weighed 485lbs plus 27lbs for the cowl - 512lbs total w/ sporty and fluids.

Great info, thanks FPM!! Did you guys happen to get this 512 lb total weight for the 20" 200R from the tag or did you weigh it?

[FBM]

Great info, thanks FPM!! Did you guys happen to get this 512 lb total weight for the 20" 200R from the tag or did you weigh it?

We weighed it here at the shop.

[skialot2]

512lbs total w/ sporty and fluids.

Thanks for this. There has been a lot of discussion about how accurate the listed weights are. Does the 512lbs include a prop? Thanks

[Ziemer]

The biggest difference is the Promax was quicker to topend by about 15 seconds, but as tested the V6R weighed 485lbs plus 27lbs for the cowl - 512lbs total w/ sporty and fluids.

It is most definitely on the positive side of 200HP.

Sounds like the 200R is roughly the same weight as a 3.0/3.2 liter Opti. Guessing the new 15" mid will most likely add a little weight to that number, but could definitely make a nice option for an XS/XB2003... A super fuel efficient 95 mph rig with only 200HP would be a nice package.

[FBM]

200R is SOLD!!!

[John S]

Hmmm, undisclosed basser. Ally XB-2002, or Bullet CC. Good #s for either