2006 300xs

**RSWORDS** · 07-08-2025, 12:24 AM

Selling my 300xs has about 100 hours on a rebuild. The ECU was replaced 71 Hours ago because it lost the fuel pump driver. it has the 6200 RPM ecu.

Compression is 125 on all 6. Motor was originally 25" with a offshore mount, and pump but right now its 20" with a standard clamp. The coned case on it doesn't have the best install job but I have another 20" lower that will go with it.

Located in Mathews VA. I can crate and ship.

Asking 10,000 for the motor, offshore clamp and pump, and spare 20" case. Text is best for me as Im not on here much anymore. 8o4-5one2-84four1.

Click image for larger version.

Name: 20250707_122913.jpg
Views: 94
Size: 405.8 KB
ID: 543892

Click image for larger version.

Name: 20250707_120718.jpg
Views: 116
Size: 422.5 KB
ID: 543893

Click image for larger version.

Name: 20250707_120341.jpg
Views: 83
Size: 405.5 KB
ID: 543894

Click image for larger version.

Name: 20250707_120255.jpg
Views: 114
Size: 413.8 KB
ID: 543895

Click image for larger version.

Name: 20250707_120304.jpg
Views: 138
Size: 419.9 KB
ID: 543896

**KIRCHNER** · 07-09-2025, 03:30 PM

is that motor 520 lbs MOL? 40LBS more than a 2.5?

**RSWORDS** · 07-13-2025, 04:00 PM

Believe it's closer 2 500

**thasilentguy** · 07-15-2025, 08:35 PM

Do you still have the 25" lower?

**KIRCHNER** · 07-17-2025, 08:09 AM

will i need a special control/ harness for it? i have pre opti merc plug/controls, no digital stuff... does the 20 power trim working?

**RSWORDS** · 07-28-2025, 09:07 AM

Originally Posted by KIRCHNER

will i need a special control/ harness for it? i have pre opti merc plug/controls, no digital stuff... does the 20 power trim working?

Sorry just saw this. I dont get on here much anymore. You can get an adaptor to use your harness. Yes the power trim works. I'll try and remember to check back on here but messaging me at the number in the 1st post is best. I'll shoot it to you in a PM also.