Pair of fresh 300X motors for sale. 26k

[JPEROG]

300X motors, wingplates, tie bar and steering rams. Cases are sportmasters with 1.75 gears.
These are the smoothest idling X motors that l have ever owned and Todd D. (the ex. X master) will confirm as he has run the boat.

26k for everything. Going to 300Rs on the 28 Skater.

Joe
386 527 18four five

[mragu]

Joe, why do you tempt me?��

[mikesufka]

300X motors, wingplates, tie bar and steering rams. Cases are sportmasters with 1.75 gears.
These are smoothest idling X motors that l have ever owned and Todd D. (the ex. X master) will confirm as he has run the boat.

26k for everything. Going to 300Rs on the 28 Skater.

Joe
386 527 18four five

Good luck - keep us posted on the switch please.

MDS

[JPEROG]

Joe, why do you tempt me?��

Nice fresh water motors with oil tanks and trim pumps included. Approx. 25 hours on complete rebuilds "all merc. parts" --no shortcuts.

Joe

[mragu]

Nice fresh water motors with oil tanks and trim pumps included. Approx. 25 hours on complete rebuilds "all merc. parts" --no shortcuts.

Joe

I wouldn’t expect anything less from you. Runs just a tick under 80 with the 225 PMs. Would be high 90s with the 300x motors

[capteliminator]

Joe, are your motors at 51" apart?

[JPEROG]

Joe, are your motors at 51" apart?

52" because of the Trim Tab cylinders. R motors will be at 56 on centers with no tabs.

Joe

[stoneman]

Joe

Are the motors 15'' or 20'' ?

Thanks Stoney

[JPEROG]

20' offshore motors Stoney

Joe

[JPEROG]

Lots of talkers but no money yet. This is a good deal for someone before they take the next step to 300Rs.

Joe

[JPEROG]

I have a party that wants one motor. I will only split these if there are two buyers and both are paid for. If you have interest in one (and are serious), please call.

Thanks,

Joe
386 527 18four five

[JPEROG]

Motors are sold, going to Michigan for a cool project.

Joe

[riverrunner808]

Who is Todd D? I have a 300x and I've been trying to get it to idle better but I haven't talked to anyone super knowledgeable about them.

[JPEROG]

Who is Todd D? I have a 300x and I've been trying to get it to idle better but I haven't talked to anyone super knowledgeable about them.

Todd is on the board here. He owns MAD EFI, you can look up his site and contact him--great guy and very knowledgeable.

Joe

[Stoker boy]

Is that the same guys that took over MAD EFI from Wayne Taylor?