Allison foil

[Captain75]

Where can I find an Allison foil to fit my Evinrude v6 lower unit?

Best regards
Anders

[Merc 2.5]

There was a used one in some merc parts in forsale section , im sure a little trimming and work just fine

[Captain75]

The Ally foil seems hard to get, anyone who can give me the measurements so I can make my own?

[Captain75]

The Ally foil seems hard to get, anyone who can give me the measurements so I can make my own?

Ok, no numbers, but are there anyone with pictures of an ally foil mouted on an omc lower?

[Merc 2.5]

Sorry I don't have 1. If u get on bbc there's a guy that makes em for what u want. Bass boat central. Do a quick search of foils. Hope u can find it. Its there and he's active

[David]

Call Allison?

[Captain75]

Call Allison?

Living almost on the other side of the globe, I was hoping to avoid that...

[David]

Sorry, I did not notice Sweden. A Bob's True Tracker worked well for me before I bought an Allison. Since I have an Allison I am of course all in, pass the kool aid.

[Captain75]

Sorry, I did not notice Sweden. A Bob's True Tracker worked well for me before I bought an Allison. Since I have an Allison I am of course all in, pass the kool aid.

Previous years I have been running a Permatrim foil, a huge fin that is great for take off, however since it breaks the rooster, it raises my stern even more at wot, with the effect that it lowers the my already heavy bow...

[David]

Neither foil cost me any speed, but I run the engine high. Would your foil be in the water at speed?

[2015Duramax]

Go on the Facebook site High Performance Boating and look up Jason Wolf he makes them and can answer any questions you might have

[Captain75]

An update following a long absense from this site…
I built myself a new fin, design based on inputs from both the ally style and the permatrim style fins.
Stainless…
Works really good, jumps on plane and does not obstruct the spray at high speed.



Enjoy summer!

[keefallan]

Looks good!!! I missed this post otherwise I would have measured mine. Looks like you have it now!

What are the measurements Paul? I wouldnt mind making one for a big lower and a small lower. What are the key features? I have a cheap one on the motor I just built, but its a generic thing, and would love to make one that has even better performance.........