Quote Originally Posted by dwilfong View Post
Well I finally got it to run wide open throttle and not melt down.
WH-15 .106 mains. 8 PSI fuel pressure stock needle and seats.
Goes full rich at wide open EGTs drop off from 1150 to 1030 at full open. Stalls at 7600 RPM 93 MPH 28p prop.
Using stock cut heads for now till the billet pucks come in. 110 PSI cranking pressure.
Can run miles and miles wide open now no problem. will lean on it from here when I get the good heads back on it.
See you all at The Kissimmee river this weekend...........................................
watch your needles and seats, 8 psi might start to cause problems, I can’t run mine that high it will float them and flood the motor.