Chrysler racing outboards

**dennispointmenace** · 11-28-2015, 10:40 PM

name, chrysler ,373366,plastic! [email protected],(23430 south patuxent beach rd. california md. 20619 usa.) good talking to you!!

**FMP** · 11-29-2015, 09:35 AM

Don't forget the 105 race guy.
Same to you!

**FMP** · 01-01-2016, 09:03 PM

Originally Posted by kdtilt

http://youtu.be/jtiAF2fWK7I

Rowdy II with a new dress on.

Read the whole thread, here is the video, others also on here.

**FMP** · 01-01-2016, 09:06 PM

Originally Posted by dennispointmenace

name, chrysler ,373366,plastic! [email protected],(23430 south patuxent beach rd. california md. 20619 usa.) good talking to you!!

He didn't have it , so he thinks . He does have a different smaller one , he is checking.

**FMP** · 01-03-2016, 09:05 PM

Originally Posted by SCT

Attachment 299742 Attachment 299743

Not a racing Chrysler but an old school cool Chrysler OB and Checkmate!
http://rockford.craigslist.org/boa/4508111576.html

Anyone on the thread know what happened to this one?

**FMP** · 02-23-2016, 03:36 PM

Chrysler four carb. Four HD carbs on adapters . Finger ported . Small bore short stroke. Big bore ,long stroke under way .

**FMP** · 02-23-2016, 03:44 PM

Stacker pipes to follow on new build . Chuck in WI says " he will be trying for 100mph." Motor will be put on prop dyno with 1.73 or 2.0 l/u when done. Any guesses on the psHP, 105c.i.?

**Mark75H** · 02-27-2016, 01:55 PM

I have expansion chambers George White of Washington DC had made for his Chrysler stacker if you are interested in them.

Don't know what rpm the length is made for; internal stingers, 90° turn so they don't hang out the back too far.

**Instigator** · 02-27-2016, 01:56 PM

Originally Posted by Mark75H

I have expansion chambers George White of Washington DC had made for his Chrysler stacker if you are interested in them.

Don't know what rpm the length is made for; internal stingers, 90° turn so they don't hang out the back too far.

Now that would be cool!

**FMP** · 02-27-2016, 04:03 PM

That's fancy cooking! Any, many pics? PLEASE. What else would have squirreled way??? Any words on how he ran with those. Some one out that way a couple months ago had a complete twin 105 set up for sale with race lowers, mids. I saw the add a couple weeks too late.

**Tom Smyth** · 02-27-2016, 04:51 PM

Got a NOS Chrysler .010 over piston, still in the box. Part number SA372015. Piston only, no pin or rings.

Gonna send it to the scrap metal man if no one makes me an offer.

**Mark75H** · 02-27-2016, 05:53 PM

Originally Posted by Tom Smyth

Got a NOS Chrysler .010 over piston, still in the box. Part number SA372015. Piston only, no pin or rings.

Gonna send it to the scrap metal man if no one makes me an offer.

I have a piston too, might be the same. I'll try to find it.

**dennispointmenace** · 02-27-2016, 06:58 PM

Originally Posted by Tom Smyth

Got a NOS Chrysler .010 over piston, still in the box. Part number SA372015. Piston only, no pin or rings.

Gonna send it to the scrap metal man if no one makes me an offer.

i see it is a 2 ring, so there should be a dash #, what size is the skirt,3- 5/16 + .010 or 3-3/8 +.010??? trying to id. it,20.00 $, ??

**Tom Smyth** · 02-27-2016, 07:52 PM

I will measure tomorrow and let you know.

no dash number on the paperwork or the box sorry to say...

**Tom Smyth** · 02-28-2016, 10:40 AM

Originally Posted by Tom Smyth

I will measure tomorrow and let you know.

no dash number on the paperwork or the box sorry to say...

did fond a dash 2 on the box barely readable.

Piston skirt across the bosses measure right at 3.300

How about $30 and I deliver to you Saturday at the CRA event in Tavares? Saves you shipping cost.

Last list price was over $100.

User Tag List

Thread: Chrysler racing outboards

Thread Tools

Display

piston + .010,sa372015, is there a dash # 1,2,3,

Posting Permissions