Carb formula 1 v8

**baja200merk** · 11-02-2015, 08:34 PM

Man those domes have a funny looking burn. Like the roofs are really flat.

**rude tim** · 11-02-2015, 09:42 PM

Originally Posted by Freddie Webb

Attachment 330875I forgot who ask for this picture but here it is. And before comments are made that is klotz benol on the cylinder wall. Those who have run it before know what a mess it makes if you don't flush with conventional oil before storing.

That was me who asked. Thank you.
Are you taking it completely apart? If so would love to see in side exhaust chest.

**powerabout** · 11-02-2015, 09:48 PM

Hi Freddie
does the have the allen head bolts on the side of the crankcase that must be holding something just beside the rod slot?
Racer tells me they are quite trick on the inside.

**Freddie Webb** · 11-02-2015, 09:54 PM

You are welcome and no sir not taking it all the way apart. Just cleaning things up.

**Freddie Webb** · 11-02-2015, 10:01 PM

This is an older engine and it has regular hex head bolts. I think the efi motor has Allen bolts

**Freddie Webb** · 11-02-2015, 10:03 PM

Kevin what makes you say that?

**Freddie Webb** · 11-02-2015, 10:05 PM

I'm assuming Kevin that you are referring to the roof angle of the transfer ports?

**powerabout** · 11-02-2015, 10:21 PM

Hi Freddie
So whats inside there?
Some kind of contoured block to feed from rod slot to the boost port( the middle transfer port)?

**Freddie Webb** · 11-03-2015, 07:27 AM

I'm not sure I understand your question powerabout.

**afr** · 11-03-2015, 07:42 AM

wow makes curious what it is i have now my model and serial number does not even come up on the list

**powerabout** · 11-03-2015, 08:38 AM

Originally Posted by Freddie Webb

I'm not sure I understand your question powerabout.

mine has these bolts, I wonder what they are for?

**Freddie Webb** · 11-03-2015, 09:07 AM

Oh, yeah I know what that is. It is a brilliant idea they had for resleeving. What you are looking at is a plug but there is a different bolt that goes in there when you are resleeving.

**powerabout** · 11-03-2015, 09:09 AM

Originally Posted by Freddie Webb

Oh, yeah I know what that is. It is a brilliant idea they had for resleeving. What you are looking at is a plug but there is a different bolt that goes in there when you are resleeving.

to hold the sleeve in place?

**baja200merk** · 11-03-2015, 09:16 AM

Align the sleeve?

**powerabout** · 11-03-2015, 09:19 AM

Originally Posted by powerabout

to hold the sleeve in place?

at the track repair, have the barby then put the block on and change the sleeves that are pre finished and they are located perfectly to allow for the alcohol content of the crew?
sounds very Australian