June 6th-9th, NO Name, NO Host, NON Event, Great Sacandaga Lake, NY

[dnelson964]

Attachment 277811What a mess

gee alby you did a number on it ! Glad you're ok....Better rebuild it stronger and keep more prop in the water going forward..

[RussF]

Dam brother you gonna need some parts and maybe some pizza

ahhhhhhhhhhhhhhh pizza.........enjoy Eric...........thanks

[albypine]

wow who's cut mid is that and how much time on it?? looks like you were doomed from the start!!!!
Pete's pics are his that I did a while back. I have never had one of mine fail and Ive done quite a few for members here. Just finished one for a member and picking it up tommorow.
Is your can broken also?? I may have a swivel in stock off a 300 that I changed to a 2inch setback 2.5ss bracket. Looks like the alignment is way out also. I have a jig to do cans that I made off an original 15 so my aligments are perfect. Glad you didn't get seriously hurt. boats can be fixed people can't.t

about 3 hours of run time . Yes to me that alignment looks way off to turn the splins like that along with cook off the 101... Will shoot ya a pm

[vnemous]

Glad your ok Alby. Your a little rough on your hardware

[Brabender]

There are only a few people who can do that job right.
could have been much much worse

[tux974]

More damage to sort threw ..... Broken fiberglass .. Shattered fuel tank .. All the rub rail screws pulled out .. Not counting I feel like I was hit by a bus at 90

I think you may need a bigger boat with twins.... All kidding aside, going forward you need to be careful, things can get out of hand real quick!!!

I'll tell you what Kent I'll go in Ryders boat and I'm sure to get plenty of pics of the front of Rocky's cat hehehe

Doesnt matter how fast your boat goes, its how far you can continually go fast...... My $ is on Ryder

I have $20 to throw in

Glad your ok Alby. Your a little rough on your hardware

You think He is on his equipment

[gm250]

Attachment 277811What a mess

Forget the pizza you need grain alcohol or was that the problem lol

[albypine]

Forget the pizza you need grain alcohol or was that the problem lol

Now your talking hope you have a few gallons made up on my way

[gm250]

Now your talking hope you have a few gallons made up on my way

I will be equipped for the Hudson just make a date

[albypine]

I think you may need a bigger boat with twins....

yup I all ready have one will be taking a grinder to it this fall.... Should be the badest 22 in the world with twin diamond 280's on the back ... Just have to find some good parts to get the virage back on the water .really need to put a number up this year ... Will take everyone's gps's and tape them to the passenger seat when I do it she was dialed in and running perfect till someone's poor work tried to kill me

[albypine]

I will be equipped for the Hudson just make a date

need 5gal to hold me over. Withdrawals suck

[JohnR]

Glad your ok Alby. Your a little rough on your hardware

If you think he's hard on his boat you oughta see what he does to his snowmobile.

[Superbender]

This is what happens when little boats think they can hang with SOBs in the rough.the problem is alby forgot to add 3 ft to his boat

[dnelson964]

My boat didn't seem to be running its best on the lake and a closer look over reveals my prop must have been lose on the shaft as I found it was boring into the carrier !! That should have shaved a good few mph off me....

I guess I should have expected 'something' after running too close to alby to the Dam on Saturday......next time I run closer to tres !




Thank goodness I am on 'Superbenders' team where any fixes are fast and painless....

[albypine]

This is what happens when little boats think they can hang with SOBs in the rough.the problem is alby forgot to add 3 ft to his boat

Show up when the river is rough that I have gobs of seat time in and we will see who makes it to pizza first I have the Extra 3 foot . Ya just did not get a good look at the 3 foot trim tab I borrowed for the weekend thanks Mikeylarge