ScreamingEagleBoats New 22 foot catamaran

**noli** · 12-31-2016, 09:17 PM

.

Todd Lamb - owner/builder ScreamingEagle boats - just gave up more pics and would not allow the new year to arrive till we saw the deck removed from his latest project...a Trick 21 that will be widened and lengthened

**NAVISPEED1** · 01-01-2017, 02:25 PM

Awesome!

**noli** · 01-03-2017, 11:08 PM

.

The floor was removed exposing the tanks. The foam surrounding the tanks were removed and the tanks were hoisted out.

**noli** · 01-28-2017, 07:49 PM

.

In-stock 300XS motors for the upcoming builds at ScreamingEagleBoats

**native2** · 01-28-2017, 08:51 PM

Cool project!!

**Ras Livity** · 01-30-2017, 12:22 AM

Great thread!!! I must say that I love scream&fly for it has allowed me to learn so much from you guys. I love seeing the builds and the custom work by the numerous members of the sight. I have also wondered has anyone ever tried to put an onboard motor in a 21 skater? Can it even fit? It was a question that has always been on my mind.

**noli** · 01-30-2017, 04:41 AM

.

there's a thread in OS O where this guy went to (or what it looks like) the junkyard for cars, took two automobile engines and installed it into a 24 Skater. looks so awesome the way it turned out.

The guy is obviously mechanically inclined.

The 22 being built (this thread) is capable of handling a single I/O if that is your power of preference.

.

**berdes** · 03-01-2017, 05:46 PM

Could not find that thread, do have have a lead or link ?

Originally Posted by noli

.

there's a thread in OS O where this guy went to (or what it looks like) the junkyard for cars, took two automobile engines and installed it into a 24 Skater. looks so awesome the way it turned out.

The guy is obviously mechanically inclined.

The 22 being built (this thread) is capable of handling a single I/O if that is your power of preference.

.

**noli** · 03-01-2017, 05:58 PM

.

Greg,

forgive me for referencing OSO in S&F

http://www.offshoreonly.com/forums/s...ml#post3991002

Noli

**4mulafastech** · 03-11-2017, 12:57 PM

Originally Posted by noli

.

Todd Lamb - owner/builder ScreamingEagle boats - just gave up more pics and would not allow the new year to arrive till we saw the deck removed from his latest project...a Trick 21 that will be widened and lengthened

Any updates on this project?

**Hydrogasm** · 03-11-2017, 01:24 PM

I just got e-mail from Todd on this project. Here is what he sent me:

"The new Edge 22 molds will not be done till about summer. Basically we have taking a 21 Trick and will be cutting it in half and widening it 10'' - 12'' down the center. We will have a center pod option for the boat or just a straight tunnel. We are then going to lengthen the boat 12" and move the driving compartment forward to help offset the heavier 400R or twin 300's. We are reworking a new dash and rear hatch for the boat also.
Feel free to get a hold of me anytime and we will be posting updates on S&F of all the shop projects here shortly. We had Noli doing it, but he has got a new job that has limited his time to do these write ups anymore.
Thanks,
Todd"

I hope that helps.
Gary