Going to test new Dewald prop

[rapidcraft22]

21 foot tunnel with 300x I have a 28 p through Hub five bladed cleaver Very curious how it's going to perform hopefully lots of tail lift

[rapidcraft22]

I started with a 28 drag 4 got 97.3 changed to Dewald and got 101.4 at 7000 rpm now Iam going to try a Dewald 29 5 blade cleaver 14 3/4 dia

[whipper]

Sweet!! How much are dewalts I hear there worth every penny but never ever hear what they cost? With a 300X on that 21 ill bet you could turn a 32 for top end.

[rapidcraft22]

Yes they are very pricy 1,700.00 for one. My boat is about 1300 lbs so iam pretty heavy The 28 drag 4 would only pull 6350 rpm. The dewald will pull 7000 so I will see what the 29 does the nice thing he will let me try props until we find the one that works best and his props are a work of art !!!

[rock]

Might have a humpback iffn ya wanna try it. Got a few I need to get rid of.

Rock

[rapidcraft22]

Hay rock give me a call 630-245-3077

[rapidcraft22]

TestIn new Dewald prop 15 in diameter 29 pitch 5 blade clever tomorrow the other one was 14 1/5 28 round ear that one ran 101.4 slip very bad out of the whole today I had 28 pitch drag 4 ran 96.5 at 6850 rpm all it would pull

[rapidcraft22]

This was first one

[Superbender]

David's props are incredible

[rapidcraft22]

Yes you are correct I don't know anybody's props that are better I gained 5 miles an hour with his prop it wasn't even the right one I hope this one is the right on tomorrow's going to be an unreal day here for horsepower about 78° Hopefully I can find calm enough water to turn it loose But I know it's going to be busy on the river 2 foot waves coming from all directions make it a little bit exciting In a 21 footer lol

[rapidcraft22]

Today was good day this prop ran verygood good out of hole great top speed

[whipper]

Those props look awesome!! There is sure a resemblance to the Hydromotive P5 hears a 30 15 1/2 dia second pic, a little pricey also but very well received in very high X dimension offshore racing boats. The p5X is a 15 dia 5 blade like the P5. the very top pic is the P5X. im not even sure if they can be hubbed for outboards?

[dnelson964]

David's props are incredible

So....I have never even thought about trying this type wheel on my 21' Challenger or 22' Activator. Do you think we are missing something here on an SOB Eric? ...

[rapidcraft22]

This happened on the second day little too thin but he is sending me something else to try We are getting very close that prop pad awesome hole shoot and Good top end alittle hard to get through the hop Between 75 and 80 instead of hopping it Would stick the nose pretty hard but when it but when it came through it pulled very hard

[rapidcraft22]

Wops I should read before posting sorry I don't know how these props would run on deep v hull these have a lot of tail lift not bow ?