2.4 200 chrome bore with LWP lower unit

[rjdubiel]

2.4 200 from the late 80's with clamshell cowl and LWP 1.87 lower, 16 amp ignition, oil injection delete, 3 wire trim, WH46 carbs, one steel sleeve in #4. Controls also included. About 35 hours on this motor since refresh and ran great on my Vking Hydrostream. $3,250.00 and shipping is available. Make offer.

[FUJIMO]

[rjdubiel]

[rjdubiel]

Here is a video of it running on the Vking.

https://youtu.be/00K0lZJMdj8?si=qrNNV3XvZiXnvt7y

[ctobias1984]

Here is a video of it running on the Vking.

https://youtu.be/00K0lZJMdj8?si=qrNNV3XvZiXnvt7y

those videos are showing a 2.5 with an offshore lower

[rjdubiel]

It's a 2.4 under the cowl. Had a jason wolf mid on in the vid. But that's the power head. That was the first run when I completed my vking recore. Before that was done I had omc's and ran my viper.

[croSSed]

If only I had the boat to put it on. I am interested in that lower, though, should you decide to part it out. GLWS!

[rjdubiel]

Any offers for a solid 2.4? The damn lower unit is worth a grand!

[skialot2]

Very nice motor. It's the wrong time of the year to sell an outboard motor. Especially in Minnesota. But I guess I am stating the obvious.

[rjdubiel]

In the last few years i have sold 3 motors over the winter, all had to be shipped to warmer weather, but the bonus is fresh water motors from MN that only get used 10-20 hours per year!

[pcrussell50]

Where were you with this a year ago?

If I hadn't already bought into a 2.4/200 program last year, I'd have been all over this. Especially from a helpful SnF'er in high regard, like you.

===

I presume from your list of bought and sold that you jumping from Hydrostream to Allison... And doing a 2.5 of some sort on that? If you made a thread about it, shoot me a link. I'd love to read your story.

-Peter