Interesting Photo...

[Capt.Insane-o]

...what is that? pegboard/masonite board? why me, as in why did i take this glass job?...

It hard board for making templates. At eight dollars a sheet it's much cheaper before you f-up a 200 dollar piece of nice plywood.

[FUJIMO]

It hard board for making templates. At eight dollars a sheet it's much cheaper before you f-up a 200 dollar piece of nice plywood.

...yup, that works. i used to supply my guys(carpenters) with 1/8'' lauan mahogany, which were $6-7 bucks a sheet for templates & ripping strips of, on a tablesaw, to make templates with. they were the doorskins for interior doors. don't know what they sell for these days. probably double that now.

[Riverratt]

It hard board for making templates. At eight dollars a sheet it's much cheaper before you f-up a 200 dollar piece of nice plywood.

When I started gutting my daughters 14' Royalcraft the core I pulled up was 1/8" pegboard. I started grinding and could not figure out what all these little round fiberglass cylinders were til I figured out is was peg board glassed over. Needless to say it was removed and replaced with balsa

[Lake X Kid]

The lower right photo with the cranes, is the pit area at San Diego.

That is where I saw the Turbines race for the first time. And the first time the Bud boat came to the pit turn at full speed, I actually got a little nervous for the driver.
Because of the high speeds it was taking the corners at.

[Mark75H]

When I started gutting my daughters 14' Royalcraft the core I pulled up was 1/8" pegboard. I started grinding and could not figure out what all these little round fiberglass cylinders were til I figured out is was peg board glassed over. Needless to say it was removed and replaced with balsa

Masonite/pegboard can hold a ton of resin. Its definitely a no-no in fiberglass construction. Pretty sure you would have to cover it with some kind of primer/sealer to keep it from continually absorbing the resin - resin itself won't seal it.

[FUJIMO]

[FUJIMO]

[FUJIMO]

[FUJIMO]

[FUJIMO]

[FUJIMO]

[FUJIMO]

[FUJIMO]

[FUJIMO]

[flabum1017]