Interesting Photo...

**Capt.Insane-o** · 03-30-2021, 04:57 PM

Originally Posted by FUJIMO

...what is that? pegboard/masonite board? why me, as in why did i take this glass job?...

It hard board for making templates. At eight dollars a sheet it's much cheaper before you f-up a 200 dollar piece of nice plywood.

**FUJIMO** · 03-30-2021, 06:07 PM

Originally Posted by Capt.Insane-o

It hard board for making templates. At eight dollars a sheet it's much cheaper before you f-up a 200 dollar piece of nice plywood.

...yup, that works. i used to supply my guys(carpenters) with 1/8'' lauan mahogany, which were $6-7 bucks a sheet for templates & ripping strips of, on a tablesaw, to make templates with. they were the doorskins for interior doors. don't know what they sell for these days. probably double that now.

**Riverratt** · 03-31-2021, 10:05 PM

Originally Posted by Capt.Insane-o

It hard board for making templates. At eight dollars a sheet it's much cheaper before you f-up a 200 dollar piece of nice plywood.

When I started gutting my daughters 14' Royalcraft the core I pulled up was 1/8" pegboard. I started grinding and could not figure out what all these little round fiberglass cylinders were til I figured out is was peg board glassed over. Needless to say it was removed and replaced with balsa

**Lake X Kid** · 04-01-2021, 02:41 PM

The lower right photo with the cranes, is the pit area at San Diego.

That is where I saw the Turbines race for the first time. And the first time the Bud boat came to the pit turn at full speed, I actually got a little nervous for the driver.
Because of the high speeds it was taking the corners at.

Click image for larger version.

Name: Bernie Little & his boats.jpg
Views: 235
Size: 408.2 KB
ID: 484831

**Mark75H** · 04-01-2021, 05:03 PM

Originally Posted by Riverratt

When I started gutting my daughters 14' Royalcraft the core I pulled up was 1/8" pegboard. I started grinding and could not figure out what all these little round fiberglass cylinders were til I figured out is was peg board glassed over. Needless to say it was removed and replaced with balsa

Masonite/pegboard can hold a ton of resin. Its definitely a no-no in fiberglass construction. Pretty sure you would have to cover it with some kind of primer/sealer to keep it from continually absorbing the resin - resin itself won't seal it.