LCB SPORTDECK Fresh 300X Break-in 115

**Risco** · 07-19-2015, 07:41 AM

Ever snice i saw mike silver one ive been in aww they our one of the best running single motor boats ive ever see.

**JPEROG** · 07-19-2015, 09:43 AM

Originally Posted by Tom Foley

With the STV Euro interior you will think you are in your old Euro on steroids less the hop !!

I talked to Brent one of the first nights that they had laid it up and told him that he was going to have something really special. I am pushing Randy to buy a couple of these to lay his paint on along with a high end interior (it is a new benchmark for a usable performance single outboard). Todd has aspirations to build two bigger models as well.

Joe

**AZMIDLYF** · 07-19-2015, 12:25 PM

So who is building these...LCB or Wicked?

**AZMIDLYF** · 07-19-2015, 12:44 PM

**JPEROG** · 07-19-2015, 01:40 PM

Originally Posted by AZMIDLYF

So who is building these...LCB or Wicked?

If you want to buy one, the guy to get in touch with is Todd D. They (Errol, Todd, and Brent) are all very close friends. All of these (sport deck) boats are coming out of Todd's molds that he acquired from (LCB-Lanier custom boats), and Todd will be selling them under the "Wicked" name. He will lay it up anyway that you want (He won't build a "lightweight chip" for anyone), but you can have it done in carbon, e-glass, or a combo of the two. Todd can offer two different deck configurations (Brent's as shown on this thread) will have more down force on the deck but its obviously already proven itself as the video shows. Todd set up another deck up with less down force because they already had experience with the flat fishing deck running so well.

Joe

**PARKER RABE** · 07-19-2015, 02:14 PM

brent lets put twins on one!!!!! ill never forget that time u made that pass at river ranch with twins, withe 3 people in the boat!

**scawd the dog** · 07-19-2015, 03:34 PM

Originally Posted by PARKER RABE

brent lets put twins on one!!!!! ill never forget that time u made that pass at river ranch with twins, withe 3 people in the boat!

Parker: Twins would be interesting again for sure and I think a 400R would be interesting too.

**Todd D** · 07-19-2015, 06:47 PM

Originally Posted by JPEROG

If you want to buy one, the guy to get in touch with is Todd D. They (Errol, Todd, and Brent) are all very close friends. All of these (sport deck) boats are coming out of Todd's molds that he acquired from (LCB-Lanier custom boats), and Todd will be selling them under the "Wicked" name. He will lay it up anyway that you want (He won't build a "lightweight chip" for anyone), but you can have in done in carbon, e-glass, or a combo of the two. Todd can offer two different deck configurations (Brent's as shown on this thread) will have more down force on the deck but its obviously already proven itself as the video shows. Todd set another deck up with less down force because they already had experience with the flat fishing deck running so well.

Joe

Click image for larger version.

Name: 20140204_173041.jpg
Views: 132
Size: 434.9 KB
ID: 323808

https://m.youtube.com/watch?v=u8paXFlDavI

**Todd D** · 07-19-2015, 06:49 PM

Originally Posted by scawd the dog

Parker: Twins would be interesting again for sure and I think a 400R would be interesting too.

Click image for larger version.

Name: ToddD2 (1).jpg
Views: 125
Size: 44.8 KB
ID: 323809

**AZMIDLYF** · 07-19-2015, 09:18 PM

What's the scuttle on the hull in the pic?

**Todd D** · 07-20-2015, 08:00 AM

The picture of the one sitting on foam is my current carbon Kevlar boat with the lower profile deck.

The pic of the boat with the photo shopped twins was the original canopy plug deck I built a few years back. As testing went on a little of the canopy was cut down each time to see how it handled. It was pretty hot inside....

**scawd the dog** · 07-20-2015, 09:11 AM

Originally Posted by Todd D

The picture of the one sitting on foam is my current carbon Kevlar boat with the lower profile deck.

The pic of the boat with the photo shopped twins was the original canopy plug deck I built a few years back. As testing went on a little of the canopy was cut down each time to see how it handled. It was pretty hot inside....

And that canopy Boat was a Runner too!!!

**Chaz** · 07-20-2015, 02:27 PM

Well ... is the powerhead broken in yet ...

**scawd the dog** · 07-20-2015, 05:00 PM

Originally Posted by Chaz

Well ... is the powerhead broken in yet ...

Charlie: I think she is ready and willing now

**Rayzor** · 07-20-2015, 06:28 PM

Congrats you guys, on such fast boats! What are the actual measurements of the hull from the face of the transom to the tip of the sponsons? And then what is the LOA including the bustle? Beam?