BaldyLargeFest Photo Thread

[AMERICANRAM]

I heard OPEC had to put there pumps on overtime when you guys went out...LOL.. great pics....

[tux974]

Nice pictures with a very nice turnout!! Boats look great!!

[mikeylarge]

[QUOTE=dnelson964;2255639]

Superboat Steve, Thank you for all of the great pictures!

HI Mike, From Steve's great shots it looks like you have done a good job to date with your set up so far !

Dr. Keith

Thank you, but I have only really run this boat a handful of times... By the time I put it together I just used whatever props I had and ran them. Next year I'll have the time to dial it in better

[vnemous]

[QUOTE=mikeylarge;2255674]

Thank you, but I have only really run this boat a handful of times... By the time I put it together I just used whatever props I had and ran them. Next year I'll have the time to dial it in better

Yeah its just thrown together with a bunch of non matching parts. Ask him where his exhaust goes

[mikeylarge]

[QUOTE=vnemous;2255690]

Yeah its just thrown together with a bunch of non matching parts. Ask him where his exhaust goes

It exits the motor, into the atmosphere just like any other combustion engine.....

[dnelson964]

[QUOTE=mikeylarge;2255701]

It exits the motor, into the atmosphere just like any other combustion engine.....

Hmmmm wait a minute. It sounds like you are getting a horse power advantage there by not keeping the exhaust to stay 'in' the motor !!

We'll have to have the outboard police check it for a leakage problem that may also be making you faster.

[mikeylarge]

[QUOTE=dnelson964;2255738]

Hmmmm wait a minute. It sounds like you are getting a horse power advantage there by not keeping the exhaust to stay 'in' the motor !!

We'll have to have the outboard police check it for a leakage problem that may also be making you faster.

Outboard policeman Ghost28 had the pleasure of scanning my motor in late august. He can confirm that my motor is 100% a factory mercury 225, heads have never been off, and the block/porting/rotating assembly is 100% factory mercury. You can go over my motor with a fine tooth comb, all you will find is a slight exhaust leak and a perfect nosecone done by Ronnie

[fast fun 2]

Sheet....itd prolly run 90 with me driving

[mikeylarge]

Sheet....itd prolly run 90 with me driving

Thats because your hair style creates lift, and causes the boat to run like its 200 pounds lighter....

[fast fun 2]

Thats because your hair style creates lift, and causes the boat to run like its 200 pounds lighter....

The side burns act like wings

[mikeylarge]

The side burns act like wings

LOL you have been drinking too many Red bull based alcoholic beverages in college .........

[fast fun 2]

Im sicker than hell right now, gotta pick on somebody lol...if it goes over 90 the wind just lifts me outta the seat

[ghost28]

[QUOTE=mikeylarge;2255740]

Outboard policeman Ghost28 had the pleasure of scanning my motor in late august. He can confirm that my motor is 100% a factory mercury 225, heads have never been off, and the block/porting/rotating assembly is 100% factory mercury. You can go over my motor with a fine tooth comb, all you will find is a slight exhaust leak and a perfect nosecone done by Ronnie

i can confirm that the ECU shows the mototr to be a 225.....but for some reason the motor has sevral hours at or above the factory rev limiter.....Just Sayin.....

[tres]

What a great day! good time for all. i would like to thank Christian, Eric and ALL of those who put this together.
no#,s out

[mikeylarge]

[QUOTE=ghost28;2255770]

i can confirm that the ECU shows the mototr to be a 225.....but for some reason the motor has sevral hours at or above the factory rev limiter.....Just Sayin.....

I have found, if you hit the limiter hard enough, it will exceed the factory limiter for a split second