Trim Indicator Parts missing On Skater

[Viper GTs]

I have the manual indicators on my Skater...Trying to find out what I need to attach it to the motors...While cleaning the bilge area. I found the cables hidden away in the wiring harness..They are complete and working...I do have one stainless stud on the clamp part of the motors. What do I need to make the indicator work ? Maybe something aftermarket instead of trying to chase these old school parts down...Thanks...Al

[moomba]

If you have 15" mid this is what you need in photo 1. 20" mid single piston photo 2. Also a different one for 3 piston mid. Stainless Marine or Livorsi.

[patchesII]

Pm Richardson Marine. David can get you the parts your missing. You'll just need to tell him whether you have 15" mid or 20"

[BUZZIN' DOZEN]

Odds are it was rigged with Bluewater when new, here's the link if ya' want to go that route
http://www.bluewaterperformance.com/index.html

[vnemous]

Pm Richardson Marine. David can get you the parts your missing. You'll just need to tell him whether you have 15" mid or 20"

Dave can hook you up

[Viper GTs]

Thanks guys....appreciate it! Moomba, are the units you are showing the livorsi units? Thanks for the pics too! Al...If i can find the missing parts used that will work too...