Today I started getting the stringers sorted.
The Keel Stringer has been joined using 12mm ply epoxied fish plates, the next two out are the same and the next two stop at the 8ft mark.
All will be fully encapsulated except for the upper edge which will be glasses after the stringers have been machined down to a finished height for the floor to glue to.
Each stringer sits in a strake so Ill lay extra glass in the strake recesses and out over the hull.
The Hull bottom will end up 1/4 inch thick which is heavy but it wont break.
Click image for larger version.  Name: stringer mock up.jpg  Views: 60  Size: 137.1 KB  ID: 480406