I Am Looking Opinions On Putting 2 300X Motors On My Cougar 22MTR!!

[Hydrogasm]

As title states I am considering putting a second 300X, which I already have from my last 22MTR that Euroski now owns, so I am looking for opinions either positive or negative on doing this. Both motors are 20" O/S models and the 2004 currently on the boat has about 10 hours on a factory replacement long block and the 2003 will be a fresh re-build. They will have left and right Sportmasters with 1.62:1 gears. I with also reduce the setback and still use 6" Bob's jackplates. There has been only one to my knowledge 22MTR with twin 300Xs on it and it is out in Washington state. If have tried to contact the owner but I have been able to talk to him to get his opinion. Bob Cruse has one with twin 280s on it. My plan is to run HC6345 SeaStar Pro cylinders with a SeaStar Pro tilt helm, wing plates and a tie bar. I live on a small lake and it if the wind picks up, the boat stays on the lift. Otherwise I would have bought Steve's 23MTR. Let me hear your comments on here or by e-mail at [email protected]
Thank you in advance your opinion
Gary