Chrysler racing outboards

Quote:

---

Originally Posted by Tom Smyth

did fond a dash 2 on the box barely readable.

Piston skirt across the bosses measure right at 3.300

How about $30 and I deliver to you Saturday at the CRA event in Tavares? Saves you shipping cost. :)


Last list price was over $100.

---

30.00 will work see you at tavares! 1979 price 32.50!!!!

Deflation

Have you got it fired ?

Measure the skirt 90 degrees from the wrist pin bore. 3.300 would leave you with 12.5 thou clearance in a stock 3-5/16 bore... it'd rattle like a mofo.

always intrested in pistons,what do the pipes look like???

1937 up and running,578 just painted,3 cyl, chr. up and running, will rig soon,leaving next wed. for fla.

See U there! The O'Berry Marine Molinari started up today and the battery is charging, so I guess I'll have to bring it.

Quote:

---

Originally Posted by RogerH

See U there! The O'Berry Marine Molinari started up today and the battery is charging, so I guess I'll have to bring it.

---

oh well no more excuses!!

Quote:

---

Originally Posted by dennispointmenace

always intrested in pistons,what do the pipes look like???

---

I'll bring them down and show you some Sunday.

90* , internal stingers. A pic's worth looking at.

Pierre Lavigne running twin 135 and 150 stackers. Hydrostream Hustler Pipcorn pad with 135 stacker.

Quote:

---

Originally Posted by FMP

Chrysler four carb. Four HD carbs on adapters . Boost ported . Small bore short stroke. Big bore ,long stroke under way .

---

I like the blue and white tunnel...Molinari right?
It would look better with the cover on the motor in my opinion. Love the styling of the Chryslers.
I have a 4 carb motor as well, has the smaller Tillotson float carbs, and the reeds are horizontal.

Hurts my ears just looking at those pictures :)

Quote:

---

Originally Posted by Mark75H

I have expansion chambers George White of Washington DC had made for his Chrysler stacker if you are interested in them.

Don't know what rpm the length is made for; internal stingers, 90° turn so they don't hang out the back too far.

---

How about a few pics, and HappyBirthDay.

Hey guys.... two questions. Did Chrysler only make cross flows and can you define boost porting? Thanks Gary

Bet "dennispoint" can answer that one!