Help me pick a handgun

Quote:

---

Originally Posted by JR IN JAX

Big Sis is probably reading this and copying down IP addresses.......

---

F*ck that bitch.:reddevil:

Quote:

---

Originally Posted by Robby321

Ya wanna see some real, homemade, stuff, its SO simple. Back when I was a kid, did a road trip to SoCal, from Illinois, at maybe 12/13? years old. 1962/3. The "Hula Hoop" then was just released there first, and for sure took off. Came back home with one, and the Midwest, not marketed there yet. I was the "hit of the kids!" BUT..at 14, we cut it open, straightened it out, slit the back end up a good 10 inches, shoved in an M80 fire cracker, stuffed the rear in the dirt, bricks to hold the tube level, roll a "Cats Eye, marble in the front", and put out a window, the Grammar school, a 1/2 block away! Never did find out, then, who or how, but think the "limitations" to bust me, are pretty well over, as 46 years ago.

And ya got a neighbor in yer face? Piss ya off?. .simple load up a 2 liter plastic soda bottle, dry ice, super glue the cap, toss, wait 2 hours.:eek:

Wanna have fun with 2 liter soda bottles? Take the cap off, drill it out for a "rubber tire valve stem". Super glue it to the cap. Load it to 100 pounds air, a compressor..(it will hold it)...set the puppy out in the yard..30 foot away, a decent pellet gun, will have that sucker 50 foot in the air!

And we do "pellet gun shoots", here, Wed nites, gearheads shop, 36x60,..(building a "box now, start doing the .22's soon") We do not do simple targets, but "tape a prize", there...simple 4th July.."poopers", that kids would toss the ground. Ya get a "BANG"?, ya win!:eek::p;):D:thumbsup:...lotta fun:thumbsup:

---

Hey Robby, I believe you may be the T-REX of firearms!!!! Al

Quote:

---

Originally Posted by RB in NM

Yesterday while blowing money in Cabela's, I saw a ad in a gun magazine, while impatiently waiting for the clerk to remember how to operate the friggin' cash register,,,about a pistol,,, .38 / .357 cal.

It wuz a revolver, med sized, stub nosed 2"ish barrel,, but what caught my attention was the flat sided cylinder,,almost square,,,, and then I noticed the barrel was on the BOTTOM ,,, the thing fired off the BOTTOM of the cylinder, not the top as 'normel' revolvers..... WTH wuz the reasoning behind the upside down barrel ? ?

RB

---

I've seen those used in pistol competitions. I believe it was to change the recoil characteristics. More of a straight back recoil giving you faster recovery from shot to shot.

Or was it this? http://chiappafirearms.com/product/729

...I want a flame thrower

Quote:

---

Originally Posted by modvp22

...i want a flame thrower

---

ok :):)

Quote:

---

Originally Posted by specboatops

ok :):)

---

sign me up. Walmart is out of them

Quote:

---

Originally Posted by Viper GTs

Hey Robby, I believe you may be the T-REX of firearms!!!! Al

---

If you want to see the biggest homemade explosion ever, just fill a SMALL balloon with an extremely Oxygen rich mixture from you Oxy-acet torch. The best way to set them off is to roll it up in a sheet of newspaper and light the far end of it. You want to be at least a hundred feet from it before it goes and 300 feet from the nearest glass window. At one hundred feet it will hit you like a volleyball in the chest.

Be careful of static electricity or any other source of ignition if you want to live.....

Not that I want anyone to try this........Big Sis...

Quote:

---

Originally Posted by JR IN JAX

If you want to see the biggest homemade explosion ever, just fill a SMALL balloon with an extremely Oxygen rich mixture from you Oxy-acet torch. The best way to set them off is to roll it up in a sheet of newspaper and light the far end of it. You want to be at least a hundred feet from it before it goes and 300 feet from the nearest glass window. At one hundred feet it will hit you like a volleyball in the chest.

Be careful of static electricity or any other source of ignition if you want to live.....

Not that I want anyone to try this........Big Sis...

---

Yep, we used to do that at work, 3/11 shift, bored. Shot red, good shot green, in a pint milk carton. Stuff a paper towel in it, light + run! Like a massive m80! One day a dude does a gallon plastic milk. Freaking BOMB....(we got in a little trouble for that one!):eek::rolleyes::p:D

Quote:

---

Originally Posted by Robby321

Yep, we used to do that at work, 3/11 shift, bored. Shot red, good shot green, in a pint milk carton. Stuff a paper towel in it, light + run! Like a massive m80! One day a dude does a gallon plastic milk. Freaking BOMB....(we got in a little trouble for that one!):eek::rolleyes::p:D

---

The best mixture is obtained by lighting the torch and adding too much oxygen to the flame until it is a sharp cone/pale blue and then tap the tip onto something metal to make it go out. Let it blow for a few seconds to cool down and then slide the balloon over the tip and let it inflate. Getting the right mixture makes it ten times more powerful. If you accidentally were to detonate it they would not find much of you left....

:)Didnt think this would ever turn into a Bomb making, tough guy, gun totin', I'z gonna kill youz with my 45 or 12 gauge thread!!:nonod::eek::cheers:

Quote:

---

Originally Posted by Viper GTs

:)Didnt think this would ever turn into a Bomb making, tough guy, gun totin', I'z gonna kill youz with my 45 or 12 gauge thread!!:nonod::eek::cheers:

---

N***** please...............................you start a thread about guns and it's ON.:thumbsup:

Wait till I tell ya'll about my golf ball cannon,.........................f*ck a potatoe launcher.:D

Quote:

---

Originally Posted by JR IN JAX

The best mixture is obtained by lighting the torch and adding too much oxygen to the flame until it is a sharp cone/pale blue and then tap the tip onto something metal to make it go out. Let it blow for a few seconds to cool down and then slide the balloon over the tip and let it inflate. Getting the right mixture makes it ten times more powerful. If you accidentally were to detonate it they would not find much of you left....

---

Yep, (bet this aint the first time ya played with the red.green!:eek::p)

The balloon thing, has me a little spooky though, static...as I KNOW, what that milk jug did...(now you kids at home, DON"T TRY THIS AT HOME!:eek::p:D

On the milk jug, gotta relate that story a bit more. Super nice guy at work, "Little Johnny", welder, just came back to work after open heart surgery. Seems he was in the "can", and just outside the door, was a massive press brake..(Reynolds Aluminum plant, back in Illinois, 120 yards long, Mach/Weld/Pipe wing). Dude sets the jug fuse, we all back WAY away, and just as its ready to go off, Johnny comes walking in the john. YELL..GO BACK!...BOOM! Shook the roof rafters dust down, that probably been there since the plant made WW2 bombs! Just too much fun!...(and yep, we were all called to the carpet VERY quick!):eek::rolleyes:

did a garbage bag full of propane once..... the tree did no survive

When I was a Teen [and later on] we used to make nitrogen tri iodide which was easy to make and great for gags. I painted the Christmas Presents at our company party, the toilet seats at the party, a friend's brake pedal, my Pastor's keyhole to his office and a doorknob at our church. The stuff was stable until it dried and once it dried it was so unstable a feather touch could set it off.
We also used to drip it on the floor going down the halls at school. It was seen as a harmless gag then, but today it would be a felony...