User Tag List
Results 1 to 15 of 71
Thread: Powder and Ceramic Coatings!!!
-
02-27-2019, 08:33 AM #1
Powder and Ceramic Coatings!!!
Just a FYI!!! East Coast Powder & Ceramic Coatings can handle most all your coating needs. We only use the highest quality Powders and ceramics made anywhere. All Our Powders are Excellent for harsh marine environments and are subjected to 2000 Hrs of Continuous salt spray in testing as is all our ceramic's.
Mid sections
Jack Plates/Lifts
Adapter Plates
Hot Foots
Battery Trays
Dash parts
UTV Parts
Lower Unit Speed Coating, Race Or Pleasure
Heads
Emblems
InBoard Parts
Custom Ceramic Coated SVS's
High temp Thermal Barrier Internal & External Engine ceramic coatings
Custom Ceramic Gun Coatings
Custom Jewling with Clear ceramic Coating
Custom License Plates to Custom Stainless steel Tumblers
Even Monster Truck parts
Last edited by HStream1; 02-27-2019 at 11:11 AM.
Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
FMP thanked for this postFMP, 89LASER, rock, oldschoolltv, Dave Strong, delawarerick, AZMIDLYF, erico, powerabout, Forkin' Crazy and 4 others liked this post
-
02-27-2019, 07:04 PM #2
I like the hot foot in blue
People say I'm lazy but it takes all my time
-
HStream1 thanked for this post
-
02-27-2019, 08:50 PM #3
Uncle BBQ .. Top Notch Work
-
Dave Strong liked this post
-
02-28-2019, 05:23 AM #4
-
specboatops liked this post
-
02-28-2019, 08:57 AM #5
Mannn ... I think I just drooled down the side of my still holdin up blue powder coated big-gulp yeti coffee mug ...
-
02-28-2019, 09:07 AM #6
-
02-28-2019, 05:15 PM #78000 RPM
- Join Date
- Feb 2007
- Location
- lily lake WI
- Posts
- 3,206
- Thanks (Given)
- 8
- Thanks (Received)
- 57
- Likes (Given)
- 1561
- Likes (Received)
- 342
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Nice Tuner you make them
-
03-02-2019, 12:57 AM #8
Yes , I made a couple different ones at the time. Those pretty much followed the size of a Hydra-Tek early then flare out to G. Jennings 6:1 ratio @ a 7* angle. Loud + obnoxious They pull a lot of raw fuel out of the cylinders and into the can and lower unit's. I'm going to cut them off to typical 300x length 6 to 7inch's, and weld the extra set of "soot deposit holes" shut. The little cats-eyes in the back are more than enough to let them run clean in our extended sacred cow zones ..
Uncle Bud ... What chu no bout tunerz ....
-
Kcraft liked this post
-
03-02-2019, 02:34 PM #9
-
specboatops liked this post
-
03-08-2019, 06:24 AM #10Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
03-08-2019, 06:37 AM #11Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
-
03-08-2019, 11:08 AM #12
-
HStream1 thanked for this post
-
03-08-2019, 01:46 PM #138000 RPM
- Join Date
- Feb 2007
- Location
- lily lake WI
- Posts
- 3,206
- Thanks (Given)
- 8
- Thanks (Received)
- 57
- Likes (Given)
- 1561
- Likes (Received)
- 342
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
How much for one of those nice custom tuners
-
03-08-2019, 02:00 PM #14
Michael: Charlie and I have had discussions about doing them to order. I wanted to get the patent paperwork submitted first. Now that thats inplace Ill get with him and formulate a plan. We spoke just today but it was on another topic all together. CHAZ!!! What Say Ye?
Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
Michael J Giesler liked this post
-
04-05-2019, 06:42 AM #15
Received this Fresh Todd Defilipps cast 15" Taylor Mid from a Lady customer out of Pennsylvania yesterday. Along with a host of other 3L Items to powdercoat. She wants this done as a surprise birthday gift for her husband. Of all the Taylor mids ive done this one that came From Todd is by far the best quality casting Ive ever received. Not a slew of sanding and filling to be done. The original ones from Taylor were terrible. The ones coming from Todd just keep getting better and better!!! A bit of sanding and minor filling and it will be ready for a Nice base coat of Epoxy Powder Primer before the final Top Coat in Gloss Black!!
Last edited by HStream1; 04-05-2019 at 06:44 AM.
Bud Conner "Heathen" "Defending Our Constitution"
FOR ALL ENGINE APPLICATIONS
DRY Film Lubricant for Piston Skirts & Cranks + Thermal Barrier Ceramic Coatings for Piston Tops, Combustion Chambers, Valves etc !!
-
Forkin' Crazy liked this post
Similar Threads
-
Powder & Ceramic Coatings!!!
By HStream1 in forum Group Purchase RequestsReplies: 0Last Post: 07-15-2014, 11:25 AM -
Ceramic Coating
By frankydee in forum Technical DiscussionReplies: 22Last Post: 11-01-2010, 07:29 PM -
Ceramic coating
By Jeff "Yammer" in forum Technical DiscussionReplies: 3Last Post: 09-18-2005, 08:30 PM -
Postings about Powder Coatings
By Murray Mirage in forum General Boating DiscussionReplies: 0Last Post: 11-04-2002, 07:23 AM