User Tag List
Thanks: 0
Results 1 to 9 of 9
Thread: How to shift
-
02-10-2017, 12:23 PM #1
How to shift
I will be taking the engine out of my 2008 Chevy Suburban. How can I put this in neutral to move the truck around after the engine is out?
"One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors". Plato .
-
02-10-2017, 12:36 PM #2Screaming And Flying!
- Join Date
- Feb 2015
- Location
- Ontario
- Posts
- 8,091
- Thanks (Given)
- 205
- Thanks (Received)
- 321
- Likes (Given)
- 1921
- Likes (Received)
- 2005
- Mentioned
- 2 Post(s)
- Tagged
- 0 Thread(s)
put it in N before you pull it ?
-
Capt.Insane-o liked this post
-
02-10-2017, 04:43 PM #3
Yep...or drop the D/S off...
-
02-10-2017, 05:18 PM #4
-
02-10-2017, 05:54 PM #5
Pop the shift cable off at the trans.Put trans in any gear but park,then turn key off.It will now roll, but remember to unlock colum before moving!
-
02-10-2017, 07:17 PM #6
-
02-10-2017, 11:33 PM #7
would I be able to put the column in park to remove the key then put the key back in later and shift back to nuetral to hoo tranny back up? I know these are dumb questions, but I never worked on one with a shift lock-out.
"One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors". Plato .
-
02-11-2017, 12:13 AM #8
-
02-18-2017, 06:32 PM #9
With the battery disconnected on this vehicle, the shift lock-out is inactive, so you don't need to unhook the cable at the tranny. Just put the key in, turn it on and shift.
"One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors". Plato .
Similar Threads
-
WTB 2.5 shift
By agibbs in forum Parts WantedReplies: 6Last Post: 03-06-2014, 10:19 AM -
Shift Cam And Shift Shaft Reinstall
By bildit4u in forum Technical DiscussionReplies: 2Last Post: 09-09-2008, 10:31 AM