Easy prop storage rack

[LakeFever]

Sometime back we had a good thread on prop storage i couldnt find to update so heres my solution. Used uni-strut 10’ length and spaced all thread 3/8”x10” rods out every 10” and man did this clear up a lot of hidey hole safe spaces where i had some of these props stashed. I have more to go but this gives you a good idea how it goes. I used 3/8 toggle washers and with 5 studs using the toggles through drywall only this is sturdy, fast to build, low buck, and most of all dead nuts easy to build

[4Speed]

Awesome idea... if anyone ever borrows one you can just put their name on a piece of paper over the empty rod to keep track. Only issue for me is hiding them from the wife - LOL

[rock]

I went a similar route with 3/8 x 8 carriage bolts mounted to a sheet of 3/4" OSB mounted high up on the wall out of reach. Holds 24 props and you can't touch them without a ladder.

Rock