24' Excalibur

**ski racer** · 03-20-2023, 12:43 AM

Excalibur 24’

Boat was an inboard originally with a 454 and bravo. In the process of converting to an outboard and have two many projects going on to complete this one

The transom has been filled, with large knee braces added to support the weight of the outboard and a bracket.

The rear seat has been slid back to open up the interior space. Included is a fiberglass hatch for the rear storage. There’s also a small cabin under the bow.

This would be a great project for the right individual. The trailer also needs work, needs lights, and tires

Same 24x7 bottom as a banana boat, Pantera, ect $7,000 OBO

**doug7488** · 03-20-2023, 07:11 PM

Good Looking Boat
GLWS

**Hozman878** · 03-22-2023, 06:36 PM

Do you know approximate weight of this boat? I thought the boat would have knee stringer design, would be stronger right?
Thanks, Jimmy.

**largecar91** · 03-23-2023, 08:57 AM

I had one of these for quite a few years. I did rebuild mine(stringers, Transom). They have a full liner with large stringers tied into the transom but mine had no knees but it was an inboard hull. Mine was heavy but they are a very nice boat

**ski racer** · 03-26-2023, 11:50 PM

Sorry I’m not sure on the weight.

it didn’t have knees originally as it was an inboard. But when I filled the transom hole we tied the strings to the top of the transom

price drop

**mikestoneclark** · 04-19-2023, 06:06 PM

These are great looking hulls! Friend had one in Annapolis, MD area. narrow beam, great stance, handled rough water well.

**hydra-sports** · 04-23-2023, 03:30 PM

Looks good. I had a 27' like that w/505 h.p, Heavy boat, smooth ride in rough water. GLWS

**99fxst99** · 04-23-2023, 04:27 PM

Location?

**Dave S** · 04-24-2023, 03:41 AM

Same as 24 SB.......early ones.... inboard had big stringers.... no Knee.......MY 1974 has nice stringers.....Cobra/SB........

.........

**ski racer** · 05-10-2023, 12:42 AM

The boat is Located In San Diego CA

The transom knees were added when we filled the Transom for the Outboard Conversion, and moved the back seat and bulk head back

**ski racer** · 05-13-2023, 10:50 AM

located in San Diego CA

Motivated to sell
I have a used hydraulic jack plate, mercury boat side wiring harness, Bennett trim tabs, and a few other rigging parts i can include. I also have a set of front bucket seats.

Need the room for the next project.