K plane 280s

[Karlkostman]

Hey guys I am interested in a k plane 280 for my Donzi Blackhawk all I need is the starboard and port planes I dont need any of the hydraulics nothing just the plates. And if you interested I will be using these to replace a set of K plane 150s and you have a need for these plates work these in on your price. If not shoot me what you have and the price please.

Thanks
Karl

[25two.stroke]

I got a set of bigass K planes. No idea what 150 or 280s are...I assume it has to do with the surface area. if you know the approximate dimensions of what you are looking for then I can measure mine and see if they are what you need. I stole the trim pump to use on my outboard, so theres no hydros to go with it. Just the plates, the rams and hoses that go from the ram to the transom or whatever. I have not looked at them in a year, they are in my shed. So let me know if I can get dims for you and I will measure and take pics. As I recall they came off a 32 ft scarab with twin big blocks and bravo I drives.

[Karlkostman]

I got a set of bigass K planes. No idea what 150 or 280s are...I assume it has to do with the surface area. if you know the approximate dimensions of what you are looking for then I can measure mine and see if they are what you need. I stole the trim pump to use on my outboard, so theres no hydros to go with it. Just the plates, the rams and hoses that go from the ram to the transom or whatever. I have not looked at them in a year, they are in my shed. So let me know if I can get dims for you and I will measure and take pics. As I recall they came off a 32 ft scarab with twin big blocks and bravo I drives.

If you could take pics and get the width measurement in the middle of the plate and the length measurement along with pics of each that would be great. Once I get this info I will know exactly what you have and maybe we can make a deal on these. Please email the info along with the pics to KKfargo@gmail.com

Thanks much
Karl

[chevy355mark]

I'm in the market for a set as well if they are the wrong size for karlkostman.

[Z06man]

Joe P may have a set he removed from a boat this year all parts are there .

[25two.stroke]

Looks like they are 280 Kplanes cause they are 14" wide and 18 long. They are old school though, so not sure if you were looking for classic ones like this or modern ones like the smartcraft compatible ones. What I have has been sitting in the shed out of the sun for 2 years and all the seals were good when I pulled them off the boat. Hydro fluid all over them now is from pulling them off the boat. Dusty, but underneath they are clean units. They have brackets for 33c cables for height gauges.

[Karlkostman]

Looks like they are 280 Kplanes cause they are 14" wide and 18 long. They are old school though, so not sure if you were looking for classic ones like this or modern ones like the smartcraft compatible ones. What I have has been sitting in the shed out of the sun for 2 years and all the seals were good when I pulled them off the boat. Hydro fluid all over them now is from pulling them off the boat. Dusty, but underneath they are clean units. They have brackets for 33c cables for height gauges.

They look like they will work how much do you want for them? I would be sending you a check for the plates and shipping to my location and you can cash the check and when you secure the funds from the check you can ship them to insure that you are good on payment. Let me know how much for them and see if we can make the deal?
Karl

[25two.stroke]

Send me an offer and your shipping address so I can get them boxed and a shipping quote.
I'll clean it up a bit too before I send it...

[Karlkostman]

Good Morning and the planes look fine would you take 500.00 for them including shipping? My address is as follows Karl Kostman 705 118th Ave S Horace ND 58047 Let me know your thoughts and I will have a check out to you on Monday am and you would have it by the thursday I would guess depending on the recent snow and blizzard activity around here lately. Thanks much and let me know your thoughts?
Karl

[25two.stroke]

Yeah, that seems fair. I'll clean them up today/tomorrow and by the time I get the check I should have them boxed up.
I will private message you on here my mailing address. I wrote down yours already and I'd recommend editing your post to take your address out of it (because all of these posts are public, you don't have to be a member to see them straight off a google search) Just my two cents...

[Karlkostman]

Yeah, that seems fair. I'll clean them up today/tomorrow and by the time I get the check I should have them boxed up.
I will private message you on here my mailing address. I wrote down yours already and I'd recommend editing your post to take your address out of it (because all of these posts are public, you don't have to be a member to see them straight off a google search) Just my two cents...

Sounds great on my end I will wait to get your PM and get the check out to you as soon as I get your address! Thanks much!
Karl