Retrofitting OMC/BRP outboards with port EFI

[powerabout]

BL
Is this fuel only or fuel and spark?

[BLisBack!]

[QUOTE=oldschoolltv;3369937]Or do you still have this one
[/QUO]

Aah memories! Sold that in 2012, it was quite the antique and wasn’t liking the frequent use too much. The cracks were starting to add up. Some guy drove all the way from AZ to FL and bought it. Even after the axle on the trailer broke after the test drive and one wheel cambered into the side of the hull and burned a slot right through the side. He still wanted it, didn’t care.

-BL

[BLisBack!]

This ECU is fuel and spark. It has an external 400w CDI power supply that puts 400v primary to the ignition coils. The ECU has complete control over the power supply and varies the power depending on engine state, cranking, low speed high speed etc.

-BL

[powerabout]

This ECU is fuel and spark. It has an external 400w CDI power supply that puts 400v primary to the ignition coils. The ECU has complete control over the power supply and varies the power depending on engine state, cranking, low speed high speed etc.

-BL

Sounds great, might have to get one