User Tag List
Results 1 to 9 of 9
Thread: 1985 15hp Evinrude/Johnson carb
-
11-21-2022, 09:49 PM #1
1985 15hp Evinrude/Johnson carb
Looking for a 15hp carb to replace the stock 9.9 carb on the motor I am restoring. My Grandpa bought this new and I recently re-gained possession of it after my brother died. This motor has made a ton of memories for me so I will have it around till I can pass it down to my niece or nephew when they are old enough, but until then I want to get a little more power out of her to have some fun with.
Anywho, I am fairly certain that the motor is a 1985 Johnson.
395509- Original 9.9 carb part#
391654- 15hp part number for the same yr. Let me know if you have anything, even if it needs a complete rebuild.
Thanks, SchramerI have a boat or two.... that I never get to drive
-
11-24-2022, 09:49 PM #2
-
11-25-2022, 02:31 PM #3
The only difference between the 9.9 and 15 were the carb and the exhaust pipe. Carb swap alone gets you more hp, but if you want the full 15 you gotta put the bell tuner in it rather than the square long tube that goes all the way to the lower unit. I probably have all the parts you need used, no nos
-
FlowMaxx thanked for this post
-
11-26-2022, 02:34 AM #4
Get me some pics....I have no issue changing out the "tuner" if it will help!
I have a boat or two.... that I never get to drive
-
11-27-2022, 08:19 PM #5
Just got back in town. If I can remember I will dig up the stuff tomorrow.
-
11-27-2022, 08:29 PM #6
Okie Dokie....Thanx!!
I have a boat or two.... that I never get to drive
-
11-28-2022, 07:01 PM #7
-
FlowMaxx thanked for this post
-
11-28-2022, 09:31 PM #8
That is fantastic! The parts need to be shipped to WI, whenever you have the time to package it all up & send them out.....no rush! Get me the total for everything. I will PM you my address. THANK YOU SOOOOOO MUCH......IT MEANS A LOT!!!!!!!!
I have a boat or two.... that I never get to drive
-
rjdubiel liked this post
-
12-26-2022, 01:45 PM #95000 RPM
- Join Date
- Sep 2008
- Location
- charlestown, ri
- Posts
- 296
- Thanks (Given)
- 0
- Thanks (Received)
- 10
- Likes (Given)
- 3
- Likes (Received)
- 37
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
might as well do CCMS reeds and grind out the intake restriction while your at it!
Similar Threads
-
Wanted Johnson 15HP carb
By Tom D. in forum Parts WantedReplies: 4Last Post: 12-06-2020, 10:24 PM -
WTB Johnson/Evinrude 9.9/15hp driveshaft std. (15") part #0321455
By JWTjr. in forum Parts WantedReplies: 0Last Post: 02-23-2017, 05:27 PM -
OMC Tech: 1985 Johnson 150 carb upgrade
By south599 in forum Technical DiscussionReplies: 29Last Post: 11-13-2013, 09:53 PM -
Johnson Carb to Evinrude EFI swap Question
By Fish in forum Technical DiscussionReplies: 4Last Post: 03-10-2004, 05:08 PM