A little off topic/hull wise 13ft Whaler ? 's

[JustDrew]

I have been on the Classic Whaler sites , but I have been hanging out here for a hell of a lot longer and value most of what I read from you guys, so Im looking for some input . I'm restoring a 1970 Classic 13 / the crazing (cracking) in the gell from sitting outside idle for 10 years drove me nuts , so I dove off over my head / stripped and flipped the boat and stared sanding. Needless to say , you have to go to bare green glass , past gel to ever rid the hull of the crazing. I really dont want to regel/cut and buff, so my thought was to use epoxy products instead and roll and tip. Starting from a sealing primer after my fill work is done. Any input from those that have been there / product knowledge and suggestions would be appreciated. Here is where Im at so far- its a slow process for sure. Thanks in advance.