User Tag List
Results 1 to 7 of 7
Thread: 89 evinrude 150
-
04-09-2022, 04:19 PM #1
89 evinrude 150
No fire at all , started simple checked fuses , where should I start checking this thing
-
04-11-2022, 05:06 PM #2
Anyone ? I'm lost on these things and dude don't have any extra stator or trigger, it has a new cdi box (big box) on side
No fire on all 6. And kill switch is hooked up
-
04-12-2022, 10:21 AM #3
Unhook the kill circuit at the pack and try it for spark. Then check voltage coming out of stator should be 180 on the Brown wires With a peak reading voltage gauge. Trigger/timer base are extremely reliable on OMC's. Also check the fly wheel if vented flywheel check magnet spacing spacing should be all the same.
Last edited by perfmarine1; 04-12-2022 at 10:28 AM.
-
Merc 2.5 thanked for this post
-
04-18-2022, 09:21 AM #4Scream And Fly VIP
- Join Date
- May 2001
- Location
- Hickory NC
- Posts
- 5,583
- Thanks (Given)
- 18
- Thanks (Received)
- 250
- Likes (Given)
- 204
- Likes (Received)
- 464
- Mentioned
- 4 Post(s)
- Tagged
- 1 Thread(s)
Also will not have spark if not cranking at least 250 rpm
-
Merc 2.5 thanked for this post
-
04-18-2022, 10:41 AM #5
Those powerpacks go bad ALL the time. Yeah, dva the stator, disconnect the kill circuit and do a visual inspection on the trigger wires to confirm they arent shorted. Then it should have sparkles
AND, I've seen the wrong stators put on those or the wrong flywheel time and time again. They made 2 different stators one is $700 and the other is $350. People don't know which stator they need so they just get the cheaper one. Look under the flywheel and make sure it looks like it has the right magnet-to-bobbin clearance on the stator. If the wrong stator is on there the clearance will be so large that the magnets wont charge the stator regardless of RPM.
-
rgsauger liked this post
-
05-19-2022, 11:24 AM #6
-
05-19-2022, 12:08 PM #75000 RPM
- Join Date
- Dec 2009
- Location
- middle tennessee
- Posts
- 215
- Thanks (Given)
- 68
- Thanks (Received)
- 28
- Likes (Given)
- 188
- Likes (Received)
- 164
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
CDI has an excellent troubleshooting guide on their website... Not trying to be an ass... Just the best advice I got for ya.
Similar Threads
-
Help Evinrude Help with 1985 Evinrude 235 2.6 XP
By dreamerdfl in forum Technical DiscussionReplies: 31Last Post: 04-24-2020, 03:46 PM -
Article: Evinrude Unveils Memorial To Legacy Of Ole Evinrude
By Scream And Fly in forum vBCms CommentsReplies: 4Last Post: 05-14-2019, 08:16 PM -
Looking for a south Florida evinrude mechanic for my evinrude 225s
By flatback in forum Technical DiscussionReplies: 4Last Post: 07-10-2013, 10:25 PM -
Evinrude 150 ho or evinrude 175 or mercury 150 pro xs
By Yubz in forum Four Stroke and Direct Injected Two Stroke EnginesReplies: 35Last Post: 03-24-2011, 10:09 PM -
1989 Evinrude 150 XP vs. 1986 Evinrude 150 Special Edition
By KOMotion in forum Technical DiscussionReplies: 10Last Post: 10-31-2009, 11:44 AM