Wingplate for Promax 2 piece adapter

[roadkill636]

Looking for a side ram wingplate that will fit my Promax with a 2 piece adapter..
I have one that fits a 1 piece but I want to keep the 2 piece and poppet and T stats.

[Greg G]

I believe I have one but have to dig it up. Or look at posts from a couple years back and there will be a photo.

[roadkill636]

I believe I have one but have to dig it up. Or look at posts from a couple years back and there will be a photo.

I'd like to see it

[rjdubiel]

Why not find a 1 pc adapter plate for a promax or modify a 260/280 plate so you can use it with stats and poppet? Or just do the john marles cooling mods for a 260/280 plate? lots of info in the thread below.

https://www.screamandfly.com/showthr...-adapter-plate

[rjdubiel]

.

photo was originally posted by Chris Carson. See thread above. Seems like a waste to put a side ram steering on the weaker 2 pc plate. Looks neat, but heavier and really not needed on a hydrostream as your hull will start to crack and fall apart before you ever need a side ram steering setup. Just my opinion, again will look neat but that is about it, just my opinion. Good luck and hope you find the best and easiest way to get it working. MAke sure you have the correct helm for an unbalanced cylinder or you will be looking for one once you get it all together.