Merc V6 Block bleed line fittings

[rs2.2]

Hi,
Ive got an EE Block 200 Merc V6 which has had the bleed line fittings removed and bunged up on the back of the powerhead. Can these fittings be purchased from mercury or somewhere similar or is it a question of removing some from another block?
Thanks

[rock]

I may have some if you need em.
Rock

[ShadowFlier]

You can still buy them new

[Jay Smith]

Yes you can buy them OEM , if Rock is willing to help take him up on his kindness he’s a great guy !!

Cheers ,
Jay @ JSRE

[Merc 2.5]

1 or 2 of em have a check ball in them i believe and others are open , have to be in the right spot also

[LakeFever]

Is there a part number for the two types?

[Aaronhl]

Is there a part number for the two types?

This is what I got in my notes
Round head push-in fitting 21-426982
Flat face push-in fitting 21-426231

[LakeFever]

I broke one attempting to remove it before sending the block to the machine shop. I left the rest in there. These are the ones on the sides of the cylinders and are all capped shut from the factory

[Aaronhl]

I broke one attempting to remove it before sending the block to the machine shop. I left the rest in there. These are the ones on the sides of the cylinders and are all capped shut from the factory

Are you talking about the elbow fittings?

[LakeFever]

Ya little 90 brass fittings is that not bleed line fittings?

[Aaronhl]

Ya little 90 brass fittings is that not bleed line fittings?

Yea those should be bleed lines cuz they connect to all the other fittings, I will have to try to find a part number for those 90 degree ones...

[tlwjkw]

tha six on tha cylinders are straight thru (no direction) type