User Tag List
Thanks: 0
Results 1 to 7 of 7
-
06-03-2021, 11:40 AM #1New Member
- Join Date
- Jan 2021
- Location
- nyc
- Posts
- 3
- Thanks (Given)
- 0
- Thanks (Received)
- 0
- Likes (Given)
- 0
- Likes (Received)
- 0
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
2001 mercury 200hp efi need help to diagnose issue
I took motor apart thinking it was a bad bearing but did find anything wrong. What else could cause this. Compression was 120 on all 6cylinders. Have a link to YouTube video of engine running and noise. Any help is greatly appreciated.
https://youtube.com/shorts/VXJMke8mS0s?feature=share
-
06-10-2021, 12:56 PM #2
was your flywheel nut easy to remove?
-
06-10-2021, 02:53 PM #3New Member
- Join Date
- Jan 2021
- Location
- nyc
- Posts
- 3
- Thanks (Given)
- 0
- Thanks (Received)
- 0
- Likes (Given)
- 0
- Likes (Received)
- 0
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
-
06-10-2021, 08:37 PM #4
I would check the timing on each cylinder and check for double firing..... How do the plugs look? Tops of pistons? Any look like they are suffering pre-ignition? How's the gear oil look? How does the splines on the drive shaft and crank look?
"One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors". Plato .
-
tlwjkw liked this post
-
06-10-2021, 08:42 PM #5New Member
- Join Date
- Jan 2021
- Location
- nyc
- Posts
- 3
- Thanks (Given)
- 0
- Thanks (Received)
- 0
- Likes (Given)
- 0
- Likes (Received)
- 0
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Plugs look good . Top of pistons also . I haven't checked but did replace the gear oil and it looked good.the splines on the drives haft looked good. Didn't check for double firing will check for that when I get it back running. BTW thanks for the reply I appreciate it.
-
06-14-2021, 12:46 PM #6Member
- Join Date
- May 2015
- Location
- Southwest Georgia
- Posts
- 96
- Thanks (Given)
- 8
- Thanks (Received)
- 7
- Likes (Given)
- 10
- Likes (Received)
- 19
- Mentioned
- 0 Post(s)
- Tagged
- 0 Thread(s)
Have you checked for a loose tuner or broken or bad reeds?
-
06-14-2021, 10:42 PM #7"One of the penalties for refusing to participate in politics is that you end up being governed by your inferiors". Plato .
Similar Threads
-
Mercury 200hp race - starting issue
By KnotNow in forum Technical DiscussionReplies: 9Last Post: 06-15-2019, 05:07 PM -
300xs spark plugs diagnose coil issue
By John2250 in forum Four Stroke and Direct Injected Two Stroke EnginesReplies: 16Last Post: 09-10-2018, 09:37 PM -
Help diagnose livorsi GPS speedo issue
By gregpro50 in forum Technical DiscussionReplies: 7Last Post: 07-28-2012, 06:06 PM -
Help diagnose volvo penta trim pump issue
By gregpro50 in forum Technical DiscussionReplies: 3Last Post: 07-26-2011, 10:57 PM -
TPS 2001 Mercury 200hp
By rickriddle in forum Technical DiscussionReplies: 4Last Post: 05-15-2011, 10:05 AM