User Tag List
Thanks: 0
Likes: 0
Results 1 to 1 of 1
Thread: 2.5L 175 merc
-
05-10-2021, 02:01 PM #1
2.5L 175 merc
Selling it as a drop-on. New rings, new crank bearings, new head gaskets, new voltage regulators, oil injection deleted, carbs cleaned. Will need a proper break-in for the new rings. Less than 1hr on the rings. Steel reeds, uncut heads...nothin special.
Previous owner said it had low compression in one cylinder. I took his word for it and tore it down without doing a compression check. I expected to find scored walls or a cracked ring or something...I found nothing wrong. That concerned me that I couldn't find anything wrong...but after looking carefully at everything I decided to just put new rings in it and put it all together and see what happens. Once together it had great compression and started right up... I think its 125 +/- 1 psi across all 6.
Last pic is from when I first pulled the heads. It has not been blown up.
$1800
Come pick it up in person or you figure shipping.
I will build a crate if I have to, but prefer local pickup.
8' Yellow Jacket - 25 hp Mariner
1984 Hst VKing - 15" Bridgeport EFI
1990 Collins Mirage - 15" 260
22' Aquasport - 150 SeaPro Fourstroke
25 hp Merc that runs on ACETONE
25 hp Merc with dry side pipe
25 hp Merc with 11" mid and 2.42:1 gears
Similar Threads
-
13ft delta 60 merc looking for 18 pitch stainless chopper prop 13 spline 60hp merc
By boogie in forum Props, Setup, and RiggingReplies: 6Last Post: 07-14-2019, 11:48 AM -
merc water pressure gauge part# to match older merc gauges??
By syclone01 in forum General Boating DiscussionReplies: 3Last Post: 09-09-2016, 10:48 PM -
Lifeline jacket, merc manual, merc lifting ring, LU flush adapter
By John S in forum Misc. Parts and AccessoriesReplies: 5Last Post: 07-13-2016, 02:21 PM -
Mercury Tech: 50hp 4cyl Merc vs. 70hp 3cyl Merc vs. ??? - Weight vs HP - Opinions??
By Steve2ManyBoats in forum Technical DiscussionReplies: 6Last Post: 02-22-2016, 07:25 AM