Is there a website like this for smaller motors?

[pt-73]

I'm looking for a site similar to this but more in line with the 50-70 OMC stuff.
Debating on rebuilding my 1988 50hp Evinrude or looking for a 3 cylinder 70.
(Then I can park the Allison for the winter.)

[nitro_rat]

There has been some discussion on here over the years although V6 Merc dominates followed by V6 OMC. The old crossflow V4 OMC's also have quite a following here. ETEC's Opti's etc all get more love here than any of the smaller motors. I have gotten quite a but of attention for posting a few things I've done with the small stuff but no love when looking for advice. Boat Racing Facts Dot Com (you'll have to string that together in your own, forum software censors it) has quite a bit more discussion on the smaller motors.

[delawarerick]

Ask you tech questions in the tech section and they will be answered. I run an old 2 cylinder 60hp evinrude and a 55 johnson and have found alot of help here.

[LakeFever]

A motors a motor. Two strokes you open ports, add compression, bigger carbs, increase timing, run the best race fuel you can and pray it holds together every pass. Or just leave em stock and work the set up like most of us

[FMP]

Swap the 50 for this, 85
Triple, 71 ci , tilt trim , 240lbs, low side bullet water pickups, 2:1, 15spline.
https://jonesboro-ar.americanlisted...._28254025.html
And some tuning , most can't.

[Capt.Insane-o]

Yes....dont let anybody detract you

[Bodhi]

Post questions and of course pictures. People here appreciate all motors and boats along with go fast. I myself have a collection of 40's 50's and 60's Evinrudes. Many life long marine mechanics on here too that I have gotten great info from