Replacement Plastic Fuel tank for STV Pro Comp?

[DangerNewb]

My tank has a flush mount fuel filler that is leaking. Haven't been able to get the insert out so I can reseal it. Broke off the plastic tab that folds up to "unscrew" the insert. Even tried a punch and hammer down in the recess for the tab. Won't budge after days of soaking with PB Blaster. So I'm thinking of just replacing the tank. The current tank fits tight between the transom knees and I'd like to find the same size tank to fit snug. It's 29 3/4 long x 15 1/2 wide x 15 1/2 tall.

Current tank has the fittings for filler and vent lines so not sure why someone installed the flush mount deal. Thanks for any guidance.

[STV_Keith]

I have what is probably the same Inca brand tank. The filler that went to the side of the deck was a PITA to use with a funnel for pre-mix, which is why I abandoned it and put a race style filler in the top of the tank myself.

[David - WI]

I bought a Moeller 24-gallon tank for my HST... it was almost impossible to find on the Moeller site, I think it's the same as this 27 gallon tank only shorter in length.
https://www.amazon.com/Moeller-Marin...35310277&psc=1

I'll see if I can find the info/e-mail when I get to work tomorrow.

[David - WI]

Well, I was mistaken... it looks like it's 23 gal and wider than what you were looking for.

SKU: Moeller 032623
Polyethylene tank which is corrosion and pit resistant. Each tank is complete with hose tite, machined aluminum fill spouts, withdraw and vent fittings molded directly into the shell. Withdraw fitting has 360 degree rotational capability for hook up convenience. Conforms to all ABYC, NMMA and US Coast Guard regulations.
Size: 24" L x 20" W x 12" H
23 Gallon Capacity

I swear there was a 24-gallon but maybe it was discontinued. It looks just like this one, which is smaller but might work? https://www.westmarine.com/buy/moell...0?recordNum=16

[DangerNewb]

Well, I was mistaken... it looks like it's 23 gal and wider than what you were looking for.

SKU: Moeller 032623
Polyethylene tank which is corrosion and pit resistant. Each tank is complete with hose tite, machined aluminum fill spouts, withdraw and vent fittings molded directly into the shell. Withdraw fitting has 360 degree rotational capability for hook up convenience. Conforms to all ABYC, NMMA and US Coast Guard regulations.
Size: 24" L x 20" W x 12" H
23 Gallon Capacity

I swear there was a 24-gallon but maybe it was discontinued. It looks just like this one, which is smaller but might work? https://www.westmarine.com/buy/moell...0?recordNum=16

The link didn't work but I found the tank. That one may work. Will check with Inca to see if they have the exact replacement though. I didn't see it on their website catalog. Thanks for the input.