User Tag List

Thanks Thanks:  0
Likes Likes:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2011
    Location
    Jupiter, FL
    Posts
    254
    Thanks (Given)
    0
    Thanks (Received)
    3
    Likes (Given)
    1
    Likes (Received)
    13
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)

    2017 Mercury 300xs 20" Offshore mid 1.62 sporty

    I am selling my model year 2017 300xs with an offshore single trim piston mid-section and a 1.62 sportmaster gear case with approximately 300 hours on it. This engine was built in October 2016 making it one of the first to come off the assembly line with the new design 2017 engine cover. It was registered in February 2018 and the warranty expired in February 2020. It was used in both fresh and salt water and flushed after every salt water use. Only full synthetic oil was used in the gear case which was religiously changed every 10 hours. Motor comes with the trim pump. My SmartCraft Vessel View and wiring harness available for purchase since I'll be replacing this motor with a 300R that uses different rigging. I'll also be selling a DBR ECU, a DBR side air intake cover and parts to convert it to a 15 inch mid-section.

    $13,900 motor & trim pump only.

    John
    561-371-7527
    Click image for larger version. 

Name:	20200408_135240.jpg 
Views:	522 
Size:	513.4 KB 
ID:	462612 Click image for larger version. 

Name:	20200408_135306.jpg 
Views:	310 
Size:	485.8 KB 
ID:	462613 Click image for larger version. 

Name:	20200213_110216.jpg 
Views:	241 
Size:	439.0 KB 
ID:	462614 Click image for larger version. 

Name:	20200213_110058.jpg 
Views:	256 
Size:	460.4 KB 
ID:	462615 Click image for larger version. 

Name:	20200213_105958.jpg 
Views:	226 
Size:	459.9 KB 
ID:	462616 Click image for larger version. 

Name:	20200213_110006.jpg 
Views:	220 
Size:	453.7 KB 
ID:	462617 Click image for larger version. 

Name:	20200213_110114.jpg 
Views:	222 
Size:	483.3 KB 
ID:	462618 Click image for larger version. 

Name:	20200408_140759.jpg 
Views:	192 
Size:	400.1 KB 
ID:	462619
    20ft Lake & Bay Custom "Low Altitude" w/ 300xs

  2. #2
    Join Date
    May 2009
    Location
    huntington
    Posts
    52
    Thanks (Given)
    0
    Thanks (Received)
    0
    Likes (Given)
    0
    Likes (Received)
    1
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by Air&Sea View Post
    I am selling my model year 2017 300xs with an offshore single trim piston mid-section and a 1.62 sportmaster gear case with approximately 300 hours on it. This engine was built in October 2016 making it one of the first to come off the assembly line with the new design 2017 engine cover. It was registered in February 2018 and the warranty expired in February 2020. It was used in both fresh and salt water and flushed after every salt water use. Only full synthetic oil was used in the gear case which was religiously changed every 10 hours. Motor comes with the trim pump. My SmartCraft Vessel View and wiring harness available for purchase since I'll be replacing this motor with a 300R that uses different rigging. I'll also be selling a DBR ECU, a DBR side air intake cover and parts to convert it to a 15 inch mid-section.

    $13,900 motor & trim pump only.

    John
    561-371-7527
    Click image for larger version. 

Name:	20200408_135240.jpg 
Views:	522 
Size:	513.4 KB 
ID:	462612 Click image for larger version. 

Name:	20200408_135306.jpg 
Views:	310 
Size:	485.8 KB 
ID:	462613 Click image for larger version. 

Name:	20200213_110216.jpg 
Views:	241 
Size:	439.0 KB 
ID:	462614 Click image for larger version. 

Name:	20200213_110058.jpg 
Views:	256 
Size:	460.4 KB 
ID:	462615 Click image for larger version. 

Name:	20200213_105958.jpg 
Views:	226 
Size:	459.9 KB 
ID:	462616 Click image for larger version. 

Name:	20200213_110006.jpg 
Views:	220 
Size:	453.7 KB 
ID:	462617 Click image for larger version. 

Name:	20200213_110114.jpg 
Views:	222 
Size:	483.3 KB 
ID:	462618 Click image for larger version. 

Name:	20200408_140759.jpg 
Views:	192 
Size:	400.1 KB 
ID:	462619
    Is the oil tank also included ? Any run time #'s for motor?Thanks

  3. #3
    Join Date
    Jul 2011
    Location
    Jupiter, FL
    Posts
    254
    Thanks (Given)
    0
    Thanks (Received)
    3
    Likes (Given)
    1
    Likes (Received)
    13
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quote Originally Posted by htmbob View Post
    Is the oil tank also included ? Any run time #'s for motor?Thanks
    Yes, if you buy it you can have the oil tank and the oil tank mount. There is about 300 hours spread out across all rpm ranges.
    20ft Lake & Bay Custom "Low Altitude" w/ 300xs

  4. #4
    Join Date
    Jul 2011
    Location
    Jupiter, FL
    Posts
    254
    Thanks (Given)
    0
    Thanks (Received)
    3
    Likes (Given)
    1
    Likes (Received)
    13
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ttt
    20ft Lake & Bay Custom "Low Altitude" w/ 300xs

  5. #5
    Join Date
    Jul 2011
    Location
    Jupiter, FL
    Posts
    254
    Thanks (Given)
    0
    Thanks (Received)
    3
    Likes (Given)
    1
    Likes (Received)
    13
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Ttt
    20ft Lake & Bay Custom "Low Altitude" w/ 300xs

  6. #6
    Join Date
    Jul 2011
    Location
    Jupiter, FL
    Posts
    254
    Thanks (Given)
    0
    Thanks (Received)
    3
    Likes (Given)
    1
    Likes (Received)
    13
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    ttt
    20ft Lake & Bay Custom "Low Altitude" w/ 300xs

Similar Threads

  1. Replies: 21
    Last Post: 10-13-2020, 07:37 PM
  2. New 2017 21 Liberator cat with Mercury 300XS
    By WILDMAN in forum Hulls larger than 20'
    Replies: 8
    Last Post: 08-14-2016, 11:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Frank Mole Transport