looking for 14x22 small ear chopper for old school merc

[marjae]

wtb

[nelson edens]

https://www.facebook.com/marketplace...8262395577556/

[Pulsare2400]

Hi,
I have a 15 spline solid hub 14" Chopper. From 1988, but was only run for about 1 year and does not have a ding in it. The number on the prop is 48 75770A4 22P. I had this prop on a 16 ft Sidewinder with a line 6 140 HP. If I recall correctly it turned about 5800 - 6000 rpm. I sent the prop off to be repitched and they stamped over the 22P so it looks like 24P but you can still see the 22P. I was hoping to pick up speed and lower the rpm but absolutely nothing changed, the boat ran the same rpm and speed, so I assumed that all they changed was the stamp and took my money. I live in Seneca SC on Lake Keowee and you can have it for $100 plus the ride, that is as low as I can go. Besides a bit of slight surface rust it would still look like new.

[Sdspropshop]

Hi,
I have a 15 spline solid hub 14" Chopper. From 1988, but was only run for about 1 year and does not have a ding in it. The number on the prop is 48 75770A4 22P. I had this prop on a 16 ft Sidewinder with a line 6 140 HP. If I recall correctly it turned about 5800 - 6000 rpm. I sent the prop off to be repitched and they stamped over the 22P so it looks like 24P but you can still see the 22P. I was hoping to pick up speed and lower the rpm but absolutely nothing changed, the boat ran the same rpm and speed, so I assumed that all they changed was the stamp and took my money. I live in Seneca SC on Lake Keowee and you can have it for $100 plus the ride, that is as low as I can go. Besides a bit of slight surface rust it would still look like new.

If the other gentleman does not take that prop I will. Thank you.

[Pulsare2400]

If the other gentleman does not take that prop I will. Thank you.

I have not heard from the other member so if you want still want it, it is yours.

[Sdspropshop]

I have not heard from the other member so if you want still want it, it is yours.

Yes, I do want it. Let me know where to send the money.

[Pulsare2400]

Hi,
If you send me the address you want the 14 x 22 (24) Mercury Chopper shipped to, I will get a cost on Monday from UPS to ship it both with and without insurance and you can chose the method you wish to use. We can then add that shipping cost to the $100 prop charge.
I have opened a PayPal account and you can click the link below.
PayPal.Me/GlennKornett

Not sure if you or someone you know is interested. I have a brand new Solas Scorpion 15 1/8" x 24P high rake, high cup, high polish 3 blade surfacing prop for sale. It was run for about 15 minutes a few months ago on a new boat / engine combo. I could only turn it at 6000 rpm and 71 mph which is too low for me. It is available with a 19 spline 1 1/4" fat shaft hub, or no hub at all and it accepts Mercury hubs. I listed it with pictures in the prop section a couple months ago.

Best Regards,

Glenn

[Sdspropshop]

[QUOTE=Pulsare2400;3188931]Hi,
If you send me the address you want the 14 x 22 (24) Mercury Chopper shipped to, I will get a cost on Monday from UPS to ship it both with and without insurance and you can chose the method you wish to use. We can then add that shipping cost to the $100 prop charge.
I have opened a PayPal account and you can click the link below.
PayPal.Me/GlennKornett

Not sure if you or someone you know is interested. I have a brand new Solas Scorpion 15 1/8" x 24P high rake, high cup, high polish 3 blade surfacing prop for sale. It was run for about 15 minutes a few months ago on a new boat / engine combo. I could only turn it at 6000 rpm and 71 mph which is too low for me. It is available with a 19 spline 1 1/4" fat shaft hub, or no hub at all and it accepts Mercury hubs. I listed it with pictures in the prop section a couple months ago.


The address is

427 S. Peak Ave.
Shepherdsville, KY. 40165


Thanks, but not interested in the other prop.

Steve

[Pulsare2400]

Hi, I sent you a private message with the tracking number for the prop I shipped to you today.

[Pulsare2400]

Prop is sold and shipped.

[marjae]

well i screwed up and never got the notice on the prop for sale. that is what i needed. anybody else that has one i am still interested somehow my notifications got turned off

[Pulsare2400]

Sorry about that. I had not heard any response from you or anyone, so after 2-3 days I told the other member he could have it.

[150aintenuff]

if i dont get my 23 back ill be in touch steve
Scott Baker has had my 15.125x23 Scorpion for almost a year... getting annoyed

[Sdspropshop]

If you still want the prop let me know. When it arrives I can send it to you. Will not be unpacked. I would need a $125.

[marjae]

Yes. I want it. Send me your paypal address
thanks