WTB Carb Throttle Arm

[TNRoostertail]

Hey guys, I need the small metal bar and the actuator that turns down to apply force to the carb linkage. I have a 2.0 and bought some later 2.5 carbs so I need the later model actuator arm. Thanks

[TNRoostertail]

Ok guys, had a member pm me. He told me I'm looking for the cam and rod for a wh carb setup. So if anyone has one for sell please let me know. Thanks

[rjdubiel]

Are your carbs WHM or WH? WHM needs cam 815539T and rod 814929.

[TNRoostertail]

They are whm 38s rj. The pics in the box are the whm carbs with the steel linkage. The carbs on the engine are the current stock carbs with the plastic linkage. Thanks

[rjdubiel]

yep, you need the triangle cam and rod part numbers above to run the WHM carbs (815539T cam and 814929 rod).

[TNRoostertail]

Right on thx rj. I did an ebay search and came up empty. Also did a google search for new parts and they are no longer available. So maybe someone here has them.

[Ryan140]

I think I have a few. I can look when I get home.

[TNRoostertail]

Thanks Ryan, much appreciated.

[Merc 2.5]

Yabi think the wmh uses it's own rod and linkage , I doubt the wh or wmv stuff will work. Not 100% sure tho. Good luck

Rob. May I ask y that choice of carbs

[Ryan140]

Shoot me a PM with a number I can text you a pic. Same number but last digit is a c

[rjdubiel]

Should look like this and the c at the end is what mine had also.

[rjdubiel]

This one we cut up some. But ya also need the clip that holds the rods to the cam and ya need the correct rod.

[TNRoostertail]

Got one otw, Ryan hooked me up.

[TNRoostertail]

Yabi think the wmh uses it's own rod and linkage , I doubt the wh or wmv stuff will work. Not 100% sure tho. Good luck

Rob. May I ask y that choice of carbs

they are 39s not 38s. they match up to 26cc heads perfectly

[Merc 2.5]

they are 39s not 38s. they match up to 26cc heads perfectly

Sry man. I dont rekon I understand? The carbs match the heads?