User Tag List
Thanks: 0
Likes: 0
Results 1 to 2 of 2
Thread: Early Model 2.0 Carb Questions
-
11-11-2019, 10:00 AM #1
Early Model 2.0 Carb Questions
Well I managed to snag a good set of 39s off of bullet in his clean out sell. They came with the manifold, reeds and linkage. I noticed the manifold has a different bolt pattern than my older 2.0, also the linkage on the carbs works backwards of mine. One goes up to open the other goes down. How do I install this? I know the manifold wont work, or at least I dont think it will, different bolt pattern. Can I use the reeds on the 39 setup? And how do I hook up the linkage? Thx as always.
Respect no wake zones!!! Evinrude guys need a place to race too.
-
11-12-2019, 09:29 AM #2
Ok got everything figured out after talking with Merc2.5.
Respect no wake zones!!! Evinrude guys need a place to race too.
Similar Threads
-
Need early model ECU 824003 A1
By Go Time in forum Parts WantedReplies: 2Last Post: 07-07-2015, 05:38 AM -
late model pistons in early model looper???
By BenKeith in forum Technical DiscussionReplies: 3Last Post: 11-25-2001, 12:34 AM