User Tag List

Results 1 to 15 of 24
-
10-31-2019, 08:54 PM #1
Ram 1500 Hauling Phismo_24 c02500wbd10312019
.
Hi, Just got my new Ram 1500 V8 haul vehicle for my 24 cat, build --> https://www.screamandfly.com/showthr...500wbd10122019
Will need help possibly during the make-better work on it
Last edited by noli; 11-02-2019 at 07:26 AM.
-
mrichartz liked this post
-
10-31-2019, 08:57 PM #2
.
Last edited by noli; 10-31-2019 at 09:01 PM.
-
10-31-2019, 09:03 PM #3
.
First items to fix
* rear differential
* exhaust
* front drive shaft reisntall
this is a 4x4 truck, but because the front drive shaft is missing its really a 4x4-2 = 4x2
.
-
11-01-2019, 12:25 PM #4
.
she's home, finally
Last edited by noli; 11-02-2019 at 07:22 AM.
-
tnelsmn liked this post
-
11-02-2019, 07:13 AM #5
driveshaft dropped
.
but before the driveshaft dropped, a few minor things happened first
1. owner told me to have it towed to my house because the rear differential is bad....very bad
2. I didn't pay any attention
3. closed deal on the truck, registered the truck, got insurance and I was on my way home and drive the truck home
4. after just 2 miles, the rear differential ceased
5. I step on the gas and I said to myself "whats wrong with this thing"
6. engine is more powerful than the bolts securing the driveshaft and ...ping...bolts fly off the driveshaft and the driveshaft falls flat to the ground
.Last edited by noli; 11-02-2019 at 07:17 AM.
-
mrichartz liked this post
-
11-02-2019, 07:13 AM #6
.
Last edited by noli; 11-02-2019 at 07:18 AM.
-
11-02-2019, 07:28 AM #7'84 Checkmate Convincor
Twin v6 closed deck Evinrude loopers
Heavily ported,2.7 heads,cooling mods
milled finger ported to match vertex pistons,
All casting slag removed
Sleeves in opposite so no idle reliefs
drilled/relieved exh, lower and mid,
148 psi comp,balanced pistons and rods, Holley red,Stuffed,77d jets 106 pullovers
CDI 8500 digital ignitions ..Boyesen reeds..And more....
-
noli liked this post
-
11-02-2019, 07:32 AM #8
Going to fix the front axle?
Helper leaf springs in back make big difference in towing too.. how heavy are your trailer etc and tongue?'84 Checkmate Convincor
Twin v6 closed deck Evinrude loopers
Heavily ported,2.7 heads,cooling mods
milled finger ported to match vertex pistons,
All casting slag removed
Sleeves in opposite so no idle reliefs
drilled/relieved exh, lower and mid,
148 psi comp,balanced pistons and rods, Holley red,Stuffed,77d jets 106 pullovers
CDI 8500 digital ignitions ..Boyesen reeds..And more....
-
11-02-2019, 07:38 AM #9'84 Checkmate Convincor
Twin v6 closed deck Evinrude loopers
Heavily ported,2.7 heads,cooling mods
milled finger ported to match vertex pistons,
All casting slag removed
Sleeves in opposite so no idle reliefs
drilled/relieved exh, lower and mid,
148 psi comp,balanced pistons and rods, Holley red,Stuffed,77d jets 106 pullovers
CDI 8500 digital ignitions ..Boyesen reeds..And more....
-
noli liked this post
-
11-02-2019, 07:38 AM #10
.
See, these are the things I don't know
What are helper springs?
.
-
11-02-2019, 07:42 AM #11'84 Checkmate Convincor
Twin v6 closed deck Evinrude loopers
Heavily ported,2.7 heads,cooling mods
milled finger ported to match vertex pistons,
All casting slag removed
Sleeves in opposite so no idle reliefs
drilled/relieved exh, lower and mid,
148 psi comp,balanced pistons and rods, Holley red,Stuffed,77d jets 106 pullovers
CDI 8500 digital ignitions ..Boyesen reeds..And more....
-
noli liked this post
-
11-02-2019, 07:48 AM #12
I DONT KNOW if these are the correct ones just an example are for 1500 ram the front leveling kit comes in more sizes too and there is also a long or a short leaf spring kit
https://rover.ebay.com/rover/0/0/0?m...2F263467174712
https://rover.ebay.com/rover/0/0/0?m...2F151609906469'84 Checkmate Convincor
Twin v6 closed deck Evinrude loopers
Heavily ported,2.7 heads,cooling mods
milled finger ported to match vertex pistons,
All casting slag removed
Sleeves in opposite so no idle reliefs
drilled/relieved exh, lower and mid,
148 psi comp,balanced pistons and rods, Holley red,Stuffed,77d jets 106 pullovers
CDI 8500 digital ignitions ..Boyesen reeds..And more....
-
11-02-2019, 07:56 AM #13
.
I will def look into this, and be sure the orig owner hasn't put one already
the reason I say this is because this new-to-me truck already has a tall stance
I actually wanted to buy this other truck just for its looks, and very low to the ground (rear wheel drive, which turned the deal)
for those who might be interested --> https://newyork.craigslist.org/brk/c...994524966.html
Last edited by noli; 11-02-2019 at 11:08 AM.
-
11-06-2019, 04:48 PM #14
.
completed my home grown rear differential stand
.
-
11-06-2019, 04:49 PM #15
.
Similar Threads
-
best boat for lake use/hauling ass
By slowverado in forum General Boating DiscussionReplies: 68Last Post: 08-29-2008, 08:21 PM -
Hauling an outboard motor
By cmikee in forum General Boating DiscussionReplies: 2Last Post: 04-24-2006, 09:21 PM -
Hauling Boat from Fla.
By Fulltilt in forum General Boating DiscussionReplies: 8Last Post: 02-16-2004, 01:16 PM