28' Victory Cat Rebuild

[keegs]

I picked up a 25' Victory Cat (who built the boats in Australia based on a Motion / Skater hull mould I believe) earlier this year which had a transom delam / rot issue after what looked to be a poor job of sealing the bolts through the engine mounts causing water ingress etc.

After pulling off the engines and getting started on the transom, I ended up deciding to a do a complete overhaul of the cockpit, upholstery, engines, etc. - so basically, I've rebuilt the entire boat.

Below is a bit of that story, figured it might be of interest to a few of you - and always nice to get feedback and ideas alone the way as well!