96 big bearing 260 block and natching front half

[DarrenFelps]

Nic is in great shape. Was still running great pulled down to re ring and inspect as I just purchased the boat with engine and found hairline cracks running up rod slots of each cyl. I don't know if this is common or not but I purchased another block. Was still running fine. No leaks. I didn't do a leakdown but compression was 145-149 Make offer if interested in this one. I don't know what it's worth the way it is. Front half has been cut and slotted to clear Reed screws. message Call or text Darren 251-402-2748 I can send any pics needed upon request. Also have heads digital horn cut by Jay smith and Reed plate with 1 inch spacer cut by Jay smith stock 16 amp lightweight flywheel in perfect shape. Various other 260 parts.

[DarrenFelps]

*matching