Mercury 2.5L CLE Gearbox Bearings.

[chubsta]

Can someone give me the actual bearing company part numbers for all the bearings in a Mercury 2.5L CLE gearbox please.

[patchesII]

You’re likely not gonna be able to source them from anywhere but Mercury. They have agreements with suppliers to only sell to Mercury. You might find one that’s similar but it won’t be the same. The OaeM’s are smarter than that

[Capt.Insane-o]

The only bearing you have to buy oem is the pinion bearing. All the rest are availiable through timken,skf,or IKO. I can PM you the numbers in a day or so.

[chubsta]

Capt.Insane-o
Could you pm the bearing part numbers please.
Thanks.

[Capt.Insane-o]

Skf number for reverse gear bearing

[chubsta]

Capt.Insane-O
Have you had a chance to find those bearing part numbers.

[friendbroker]

I'm rebuilding a 1.87 sportmaster is the bearing list the same for that one ? if yes can you forward to me as well thank you !

[chubsta]

I'm still waiting for the bearing part numbers.
All the bearings should be the same.
Sportmaster have an extra driveshaft bearing.

[friendbroker]

I'll buy the drive shat bearings OEM and use your list on the prop shaft I'll keep an eye out for it thank u

[chubsta]

Can anyone else help with the bearing part numbers please.

Thanks.

[friendbroker]

go ahead and open your lower unit the bearing #'s for all the taper bearings are stamped on them my forward bearing in my speed master jm205149 cup jm205110 I ordered all the roller bearings from Merc dealer be careful of the inner bearing on the forward gear VERY tricky to remove I fabricated a spanner flange and pressed it out the rest are easy with basic pullers and press