Donzi 22 Classic Outboard 300hp HPDI Prop?

[alex@collectyourrent.com]

I have a 22' Donzi classic OUTBOARD that I'm powering with a 300 HPDI. Need to know where to start with prop?

would like something that's works well for cruising with family with some punch. With a 300 its never going to be crazy fast but I would like to get 55mph...

The motor is mounted onto the transom, no bracket.

The boat weighs about 3400lbs with motor.

Thank for the help

[alex@collectyourrent.com]

[David]

20" Trophy if you can find a cheap one for a baseline?

[Greg G]

That is a round bottom 24 degree V unless someone messed with it during the conversion. You must install a manual jackplate to play around with that 25" motor and I'd start with a 19 pitch Rev 4 prop.

[David]

300 HPDI could be 25 or 30 or if its the VMAX version it's 20. Good call on shaft length. 19-20 is the right pitch range for 55.