Mercury 250XS trouble code

[mikej]

I took out the boat this weekend and my motor started beeping and the smartcraft gauge said "fuel injection not working properly see dealer soon". It is a 2010 250XS. Anyone had this problem before and what was the fix?

[mikej]

Trouble code on DDT said FINJ2 OPEN

[XstreamVking]

Air or fuel injector not operating correctly. Sounds like fuel inj, with a FIN J2 code showing. Get it figured out, this can blow your engine.

[mikej]

I already pulled air and fuel injectors and they tested good. They both flowed good numbers and not the problem. I even swapped injectors to another cylinder and code stayed on the same cylinder. I am starting to think it might be a harness issue.

[Euroski]

I already pulled air and fuel injectors and they tested good. They both flowed good numbers and not the problem. I even swapped injectors to another cylinder and code stayed on the same cylinder. I am starting to think it might be a harness issue.

Then my guess wiring harness issues. do a pin check for ohms from ECM to injectors.

[Motv18]

Or the ecm could be bad, just find the open could even be a loose pin or ground, I think ground would show more then one though.

[mikej]

It ended up being a bad injector plug when I was checking the plug to ecu. Easy fix and thanks for the input.