Complete mercury rigging for twins and vessel view 4

[Fishtaco]

Everything needed to rig a pair of mercury engines including a vessel view 4
all about a year old except the binnacle it’s 4 years old.
Included
2 mercury 13 pin harness
2 mercury key switches
2. mercury 4 gang hubs
1 Mercury kill switch and binnacle harness
1. mercury CAN data cable
1. mercury vessel view adapter harness
1. Vessel view 4
1. NMEA 2000 adapter
1. Dual mercury binnacle
4. 25 foot mercury extreme throttle shift cables
well over $2000 new.
Asking $1000 for everything
located in Sarasota fl
941-232-11six five

[Fishtaco]

[Fishtaco]

[Fishtaco]

This vessel view will go right to your Nmea set up for gps. Nothing else to buy. This is everything but the engines and steering

[Fishtaco]

Sold. Vessel view. So remaining rigging is only $500
everything minus vessel view.

[2.5-21]

Can you post a picture of the nmea 2000 adapter or a part number?

[Fishtaco]

The adapter is part of the vessel view system. It is a 15 dollar cable at west marine. It’s all the other rigging that allows for nmea to work. Mercury makes you build a system. I can help if needed. Everything needed except the vessel view is in my forsale area above.

[2.5-21]

How much for 1 j box the blue cable and kill switch?

[Fishtaco]

I don’t mind splitting up the binnacle and rigging. But I am going to keep the rest of the rigging together for now. Makes more sense. Just make a offer

[Fishtaco]

Ttt

[luv2gofast]

I don’t mind splitting up the binnacle and rigging. But I am going to keep the rest of the rigging together for now. Makes more sense. Just make a offer

Checking to see if you still have any of this. Not interested in the binnacle or control cables but if you have the rest available I would be interested.