Quote Originally Posted by FORBESAUTO View Post
Click image for larger version.  Name: 9DD27826-56C2-4C47-8E5F-F5440BCB045C.jpg  Views: 98  Size: 439.1 KB  ID: 435125
Six petal rubber coated reeds, with some serious restriction on the outer openings from the cage bolt bosses.
Click image for larger version.  Name: 049B5F85-516D-4533-9EFC-D07293176582.jpg  Views: 103  Size: 408.6 KB  ID: 435126
Installed Chris Carson reeds with factory stops. Has lots of room to stuff them down, but not sure how it would work with having to install the intake in a downward motion, if you would run into clearance problems during installation. I may play with this to see if stuffers could be used once I’m done with all the reeds
Must have been smokin crack when looked at being able to stuff the reed cages down in front, not much room for reed stops and screws to lower cages into front without modifications, must have threw the bare cage in there with no reed stops or screws. If I was to tighten the crankcase on these, looks like doing it in the crankcase with epoxy would be the way to go. Keeping this one mostly stock except for few minor adjustments, so no changes in cc volume on this one.