User Tag List
Thanks: 0
Results 1 to 12 of 12
Thread: Mariner Racing built 2.5
Threaded View
-
11-03-2018, 11:02 AM #1
Mariner Racing built 2.5
this is the .044 over motor that was on my Seebold.
it was sent off to Ruck for a sleeve before its last rebuild.
it has new pistons,capped wrist pins, all new bearings, new lapped 2 piece sealing rings, decked 7 peddle ( non oiler) front half,efi reed blocks with single stage reeds.
The ports are matched to 300 drag specs with behind the liner work done as well. The pistons were machined to match the transfer ports.
it has one of my worked manifolds on it with one of my spacer plates , all complimented by a set of wmh 3 pumper carbs.
It is fully dressed and topped off with an aluminum flywheel.Last edited by MARINER RACING; 11-03-2018 at 11:24 AM.
...................................MARINER RACING
...............HIGH PERFORMANCE ENGINE BUILDING AND MACHINING
....MAKER OF THE WORLD FAMOUS 1 INCH PLASTIC SPACER PLATE
...SPECIALIZING IN 2.4+2.5 CARBURETED AND STEEL BORE MOTORS
Similar Threads
-
XS Series-Custom Built From Mercury Racing.
By 4-strucked in forum General Boating DiscussionReplies: 6Last Post: 05-09-2012, 10:23 AM -
Boat racing stadium to be built in Missouri
By jeffbare in forum General Boating DiscussionReplies: 6Last Post: 12-12-2010, 09:29 AM -
2 decked out motors built by MARINER RACING
By MARINER RACING in forum General Boating DiscussionReplies: 25Last Post: 05-31-2005, 07:31 PM